User manual ROLAND RE-101

[. . . ] (Initial value is ON) For Drum Parts, not received when Rx. NOTE ON = OFF for each Instrument. n = MIDI channel number : 0H-FH (ch. 1-ch. 16) vv = Volume : 00H-7FH (0-127), Initial Value = 64H (100) * * Volume messages are used to adjust the volume balance of each Part. (Initial value is ON) Pan (Controller number 10) Polyphonic Key Pressure Status AnH 2nd bytes kkH 3rd byte vvH Status BnH 2nd bytes 0AH 3rd byte vvH n = MIDI channel number : 0H-FH (ch. 1-ch. 16) kk = note number : 00H-7FH (0-127) vv = key pressure : 00H-7FH (0-127) * * Not received when Rx. POLY PRESSURE (PAf) = OFF. (Initial value is ON) The resulting effect is determined by System Exclusive messages. With the initial settings, there will be no effect. n = MIDI channel number : 0H-FH (ch. 1-ch. 16) vv = pan : 00H-40H-7FH (Left-Center-Right), Initial Value = 40H (Center) * * For Rhythm Parts, this is a relative adjustment of each Instrument's pan setting. [. . . ] When you use CHORUS MACRO to select the chorus type, each chorus parameter will be set to the most suitable value. 40 03 00 00 00 02 00 - 7F * Refer to EFX Type Table (P. 11) EFX TYPE (MSB, LSB) 00 00 - 7F 7F 00 01 Thru 40 01 38 00 00 01 00-07 CHORUS MACRO 7 * This EFX Type is current EFX type of this system. When part EFX type is same to this EFX type, that part connect to EFX. 40 03 03 00 00 01 00 - 7F EFX Parameter 1 40 03 04 00 00 01 00 - 7F EFX Parameter 2 40 03 05 00 00 01 00 - 7F EFX Parameter 3 40 03 06 00 00 01 00 - 7F EFX Parameter 4 40 03 07 00 00 01 00 - 7F EFX Parameter 5 40 03 08 00 00 01 00 - 7F EFX Parameter 6 40 03 09 00 00 01 00 - 7F EFX Parameter 7 40 03 0A 00 00 01 00 - 7F EFX Parameter 8 40 03 0B 00 00 01 00 - 7F EFX Parameter 9 40 03 0C 00 00 01 00 - 7F EFX Parameter 10 40 03 0D 00 00 01 00 - 7F EFX Parameter 11 40 03 0E 00 00 01 00 - 7F EFX Parameter 12 40 03 0F 00 00 01 00 - 7F EFX Parameter 13 40 03 10 00 00 01 00 - 7F EFX Parameter 14 40 03 11 00 00 01 00 - 7F EFX Parameter 15 40 03 12 00 00 01 00 - 7F EFX Parameter 16 40 03 13 00 00 01 00 - 7F EFX Parameter 17 40 03 14 00 00 01 00 - 7F EFX Parameter 18 40 03 15 00 00 01 00 - 7F EFX Parameter 19 40 03 16 00 00 01 00 - 7F EFX Parameter 20 * Each parameter will be changed by EFX type. (P. 12) 40 03 17 00 00 01 00 - 7F * Set to 0 when EFX type is changed. 40 03 18 00 00 01 00 - 7F * Set to 0 when EFX type is changed. 40 03 1A 40 03 1B 00 00 01 00 00 01 00 - 7F 00 - 7F EFX Send Level to Reverb EFX Send Level to Chorus EFX Depth EFX Control Source 1 Dry 100% - EFX 100% 00: OFF 01 - 5F: Control Change No. 71: CAf 72: Bender *Refer to EFX Control Source 1 7F 00 40 03 1C 00 00 01 00 - 7F EFX Control Depth 1 40 03 1D 00 00 01 00 - 7F EFX Control Source 2 40 03 1E 00 00 01 00 - 7F EFX Control Depth 2 * Marked #1 or #2 can be controlled by EFX CONTROL SOURCE 1 or 2. 7F 00 7F -100% - +100% -100% - +100% Part Parameters KR375 has 16 parts. Parameters that can be set individually for each Part are called Part parameters. If you use exclusive messages to set Part parameters, specify the address by Block number rather than Part Number (normally the same number as the MIDI channel). The Block number can be specified as one of 16 blocks, from 0 (H) to F (H). The relation between Part number and Block number is as follows. 40 1x 24 00 00 01 00-01 Rx. BANK SELECT LSB * KR375 can be recognise Bank Select LSB (40H-43H) even if this message is OFF. 40 1x 25 40 1x 28 40 1x 29# 40 1x 30 40 1x 31 40 1x 32 40 1x 33 40 1x 34 40 1x 35 40 1x 36 40 1x 37 00 00 01 00 00 03 00-01 00-7F TONE REMAIN Bank Select LSB Range OFF/ON 00 ON (OFF*) OFF OFF/ON LSB (from) LSB (to) -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 -50 - +50 01 40 43 40 40 40 40 40 40 40 40 ON 40H 43H 0 0 0 0 0 0 0 0 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 0E-72 0E-72 0E-72 0E-72 0E-72 0E-72 0E-72 0E-72 TONE MODIFY 1 Vibrato rate (= NRPN# 8) TONE MODIFY 2 Vibrato depth (= NRPN# 9) TONE MODIFY 3 TVF cutoff frequency (= NRPN# 32) TONE MODIFY 4 TVF resonance (= NRPN# 33) TONE MODIFY 5 TVF&TVA Env. attack (= NRPN# 99) TONE MODIFY 6 TVF&TVA Env. decay (= NRPN# 100) TONE MODIFY 7 TVF&TVA Env. release (= NRPN# 102) TONE MODIFY 8 Vibrato delay (= NRPN# 10) 40 1x 40 00 00 0C 00-7F SCALE TUNING C -64 - +63 [cent] 40 0 [cent] 40 1x 41# 00-7F SCALE TUNING C# -64 - +63 [cent] 40 0 [cent] 40 1x 42# 00-7F SCALE TUNING D -64 - +63 [cent] 40 0 [cent] 40 1x 43# 00-7F SCALE TUNING D# -64 - +63 [cent] 40 0 [cent] 40 1x 44# 00-7F SCALE TUNING E -64 - +63 [cent] 40 0 [cent] 40 1x 45# 00-7F SCALE TUNING F -64 - +63 [cent] 40 0 [cent] 40 1x 46# 00-7F SCALE TUNING F# -64 - +63 [cent] 40 0 [cent] 40 1x 47# 00-7F SCALE TUNING G -64 - +63 [cent] 40 0 [cent] 40 1x 48# 00-7F SCALE TUNING G# -64 - +63 [cent] 40 0 [cent] 40 1x 49# 00-7F SCALE TUNING A -64 - +63 [cent] 40 0 [cent] 40 1x 4A# 00-7F SCALE TUNING A# -64 - +63 [cent] 40 0 [cent] 40 1x 4B# 00-7F SCALE TUNING B -64 - +63 [cent] 40 0 [cent] * SCALE TUNING is a function that allows fine adjustment to the pitch of each note in the octave. The pitch of each identically-named note in all octaves will change simultaneously. A setting 9 of ±fi0 cent (40H) is equal temperament. Supplementary material, "The Scale Tune Feature"(p-13). 40 2x 00 40 2x 01 40 2x 02 40 2x 03 40 2x 04 40 2x 05 40 2x 06 40 2x 07 40 2x 08 40 2x 09 40 2x 0A 40 2x 10 40 2x 11 40 2x 12 40 2x 13 40 2x 14 40 2x 15 40 2x 16 40 2x 17 40 2x 18 40 2x 19 40 2x 1A 40 2x 20 40 2x 21 40 2x 22 40 2x 23 40 2x 24 40 2x 25 40 2x 26 40 2x 27 40 2x 28 40 2x 29 40 2x 2A 40 2x 30 40 2x 31 40 2x 32 40 2x 33 40 2x 34 40 2x 35 40 2x 36 40 2x 37 40 2x 38 40 2x 39 40 2x 3A 40 2x 40 40 2x 41 40 2x 42 40 2x 43 40 2x 44 40 2x 45 40 2x 46 40 2x 47 40 2x 48 40 2x 49 40 2x 4A 40 2x 50 40 2x 51 40 2x 52 40 2x 53 40 2x 54 40 2x 55 40 2x 56 40 2x 57 40 2x 58 40 2x 59 40 2x 5A 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 40-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F MOD PITCH CONTROL MOD TVF CUTOFF CONTROL MOD AMPLITUDE CONTROL MOD LFO1 RATE CONTROL MOD LFO1 PITCH DEPTH MOD LFO1 TVF DEPTH MOD LFO1 TVA DEPTH MOD LFO2 RATE CONTROL MOD LFO2 PITCH DEPTH MOD LFO2 TVF DEPTH MOD LFO2 TVA DEPTH BEND PITCH CONTROL BEND TVF CUTOFF CONTROL BEND AMPLITUDE CONTROL BEND LFO1 RATE CONTROL BEND LFO1 PITCH DEPTH BEND LFO1 TVF DEPTH BEND LFO1 TVA DEPTH BEND LFO2 RATE CONTROL BEND LFO2 PITCH DEPTH BEND LFO2 TVF DEPTH BEND LFO2 TVA DEPTH CAf PITCH CONTROL CAf TVF CUTOFF CONTROL CAf AMPLITUDE CONTROL CAf LFO1 RATE CONTROL CAf LFO1 PITCH DEPTH CAf LFO1 TVF DEPTH CAf LFO1 TVA DEPTH CAf LFO2 RATE CONTROL CAf LFO2 PITCH DEPTH CAf LFO2 TVF DEPTH CAf LFO2 TVA DEPTH PAf PITCH CONTROL PAf TVF CUTOFF CONTROL PAf AMPLITUDE CONTROL PAf LFO1 RATE CONTROL PAf LFO1 PITCH DEPTH PAf LFO1 TVF DEPTH PAf LFO1 TVA DEPTH PAf LFO2 RATE CONTROL PAf LFO2 PITCH DEPTH PAf LFO2 TVF DEPTH PAf LFO2 TVA DEPTH CC1 PITCH CONTROL CC1 TVF CUTOFF CONTROL CC1 AMPLITUDE CONTROL CC1 LFO1 RATE CONTROL CC1 LFO1 PITCH DEPTH CC1 LFO1 TVF DEPTH CC1 LFO1 TVA DEPTH CC1 LFO2 RATE CONTROL CC1 LFO2 PITCH DEPTH CC1 LFO2 TVF DEPTH CC1 LFO2 TVA DEPTH CC2 PITCH CONTROL CC2 TVF CUTOFF CONTROL CC2 AMPLITUDE CONTROL CC2 LFO1 RATE CONTROL CC2 LFO1 PITCH DEPTH CC2 LFO1 TVF DEPTH CC2 LFO1 TVA DEPTH CC2 LFO2 RATE CONTROL CC2 LFO2 PITCH DEPTH CC2 LFO2 TVF DEPTH CC2 LFO2 TVA DEPTH -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] 0-24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -24 - +24 [semitone] -9600 - +9600 [cent] -100. 0 - +100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] -10. 0 - +10. 0 [Hz] 0-600 [cent] 0-2400 [cent] 0-100. 0 [%] 40 40 40 40 0A 00 00 40 00 00 00 42 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 40 40 40 40 00 00 00 40 00 00 00 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 47 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 2 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [semitones] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 [Hz] 0 [cent] 0 [cent] 0 [%] 0 40 4x 23 00 00 02 00 - 7F PART EFX TYPE (MSB, LSB) 00 00 - 7F 7F 00 00 * This EFX type is same to EFX type of System Parameter. When this EFX type is same to EFX type of System parameter (see the page. 7), the part connect to EFX. 40 4x 25# 40 4x 26# 00 00 01 00 00 01 00 - 7F 00 - 7F PART EFX MACRO PART EFX DEPTH 00 00 00 00 0 0 10 Drum Setup Parameters * * m: Map number (0 = MAP1, 1 = MAP2) rr: drum part note number (00H-7FH) Size (H) 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 Data (H) 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-01 00-01 Parameter PLAY NOTE NUMBER LEVEL (= NRPN# 26) ASSIGN GROUP NUMBER PANPOT (= NRPN# 28, except RANDOM) REVERB SEND LEVEL (= NRPN# 29) CHORUS SEND LEVEL (= NRPN# 30) Rx. NOTE ON Description Pitch coarse TVA level Non, 1-127 -64 (RANDOM), -63 (LEFT) - +63 (RIGHT) 0. 0-1. 0 Multiplicand of the part reverb depth 0. 0-1. 0 Multiplicand of the part chorus depth OFF/ON OFF/ON Address (H) 41 m1 rr 41 m2 rr 41 m3 rr 41 m4 rr 41 m5 rr 41 m6 rr 41 m7 rr 41 m8 rr * When the Drum Set is changed, DRUM SETUP PARAMETER values will all be initialized. 11 Section 4. Supplementary material Decimal and Hexadecimal table In MIDI documentation, data values and addresses/sizes of exclusive messages etc. are expressed as hexadecimal values for each 7 bits. [. . . ] For example, the settings introduced below will set the unit to use the Arabian Scale. Example Settings Note name Equal Temperament C 0 C# 0 D 0 D# 0 E 0 F 0 F# 0 G 0 G# 0 A 0 A# 0 B 0 Just Temperament (Keytone C) 0 -8 +4 +16 -14 -2 -10 +2 +14 -16 +14 -12 Arabian Scale -6 +45 -2 -12 -51 -8 +43 -4 +47 0 -10 -49 <Example> Set the tuning of MIDI channel 3 to A4 = 442. 0 Hz Send RPN#1 to MIDI channel 3. From the above table, the value is 45 03H. B2 (B2) (B2) (B2) (B2) (B2) 64 00 65 01 06 45 26 03 64 7F 65 7F MIDI ch. 3, lower byte of RPN parameter number: 00H (MIDI ch. 3) upper byte of RPN parameter number: 01H (MIDI ch. 3) upper byte of parameter value: 45H (MIDI ch. 3) lower byte of parameter value: 03H (MIDI ch. 3) lower byte of RPN parameter number: 7FH (MIDI ch. 3) upper byte of RPN parameter number: 7FH The values in the table are given in cents. [. . . ]