User manual ROLAND RG-3 MANUAL 2

[. . . ] 201b Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (p. 2), "USING THE UNIT SAFELY" (p. 3­5), and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. [. . . ] User Program Registration You can register the currently selected tone buttons, transposition and volume balance, and a variety of other settings as "favorite performance settings" (User Program). This allows you to call up the registered favorite performance settings whenever you need them. Registering the settings you often use is makes it even more convenient for you. fig. 05-010 For more on what can be registered to a User Program, refer to "Parameters Stored in the User Program" (p. 109). Panel Settings 1 User Program Write Temporary Memory 1 7 2 8 3 4 5 6 9 10 11 12 RG-3 User Memory Save 123456 123456 123456 123456 7 18 29 3 4 5 6 89345 7 1 8 2 9 10 11 12 6 7 8 9 10 11 12 10 11 12 7 10 11 12 7 8 9 17 18 13 7 8 9 10 11 12 14 15 16 10 11 12 13 14 15 16 17 18 13 14 15 16 17 18 13 14 15 16 17 18 19 13 14 15 16 17 18 20 21 22 23 24 19 13 14 15 16 17 18 19 20 21 22 23 24 19 20 21 22 23 24 20 21 22 23 24 19 20 21 22 23 24 25 19 20 21 22 23 24 25 26 27 28 29 30 25 26 27 28 29 30 25 26 27 28 29 30 26 27 28 29 30 31 25 26 27 28 29 30 32 33 34 35 36 31 25 26 27 28 29 30 31 32 33 34 35 36 32 33 34 35 36 31 32 33 34 35 36 31 32 33 34 35 36 31 32 33 34 35 36 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Load . . . . . 36 User Programs (1 User Program Set) Max. 99 User Program Sets USB Memory Save 123456 123456 123456 123456 7 18 29 3 4 5 6 89345 7 1 8 2 9 10 11 12 6 7 8 9 10 11 12 7 8 9 10 11 12 7 15 1610 11 12 13 14 8 9 10 11 12 17 18 13 7 15 16 10 11 12 13 14 15 16 17 18 13 14 15 16 17 18 14 17 18 19 13 14 15 16 17 18 13 14 15 16 17 18 20 21 22 23 24 19 20 21 22 23 24 19 20 21 22 23 24 19 20 21 22 23 24 25 19 20 21 22 23 24 26 27 28 29 30 25 19 20 21 22 23 24 25 26 27 28 29 30 25 26 27 28 29 30 25 26 27 28 29 30 31 25 26 27 28 29 30 33 34 35 36 31 32 26 27 28 29 30 31 32 33 34 35 36 31 32 33 34 35 36 31 32 33 34 35 36 31 32 33 34 35 36 32 33 34 35 36 Load . . . . . Max. 99 User Program Sets 79 Chapter 5. User Program Registration Saving Performance Settings (User Program) You can register up to 36 User Programs to the RG-3. 1. 3. Set the Tone, and other data until the settings are the way you want them. Press the [Function] (Exit) button, getting its indicator to light. Press the [Song] (Select -) button or [ display the USER PROGRAM screen. fig. 05-020d ] (Select +) button to 4. Press the [Song] (Select -) button or [ "WRITE" is flashing. fig. 05-030d ] (Select +) button so 5. Press the [Enter] button. The following screen appears. fig. 05-040d 6. Press the [ ] (Value -) button or [ select the write-destination number. ] (Value +) button to Select a number from UPG 01 to UPG 36 as the performance settings write destination. fig. 05-050d 7. Press the [Enter] button. A confirmation message appears in the screen. fig. 05-060d 8. Press the [Enter] button. The currently selected performance settings are registered, and the USER PROGRAM screen returns to the display. 80 Chapter 5. User Program Registration Calling Up Saved User Programs You can easily call up User Programs. You can use the Pedal as a dedicated switch for selecting User Programs in order. For more details, refer to "Using the Pedal to Switch User Programs" (p. 2. Press the [Function] (Exit) button so the indicator goes out. Hold down the [Function] (Exit) button and press the [ ] (Value -) button or [ ] (Value +) button to select the User Program you want to call up. fig. 05-070d The display changes to indicate the registered buttons and other performance settings. The tone name registered in the User Program appears in the lower row of the screen. Turning Off the User Program Settings To turn off the user program settings, proceed as follows. 1. 2. Press the [Function] (Exit) button so the indicator goes out. Hold down the [Function] (Exit) button and press the [ (Value -) button to select "User Program 01. " fig. 05-070d ] 3. While holding down the [Function] (Exit) button and the [ (Value -) button once again. The user program settings are turned off. ] 81 Chapter 5. User Program Registration Saving the User Program Sets The 36 separate configurations of User Programs registered in the RG-3 can be saved as sets in User Memory (p. * When saving the settings to USB memory, connect the USB memory to the Ext Memory port (p. 22). You can restore the content in the User Memory to the original default factory settings. Refer to "Initializing the User Memory, USB Memory, and Floppy Disks" (p. 2. Press the [Function] (Exit) button, getting its indicator to light. [. . . ] Cra 43 B No 25 A 41 Bododega 9 Medellin, Colombia TEL: (574)3812529 PERU Audionet Distribuciones Musicales SAC Juan Fanning 530 Miraflores Lima - Peru TEL: (511) 4461388 MALAYSIA Roland Asia Pacific Sdn. 45-1, Block C2, Jalan PJU 1/39, Dataran Prima, 47301 Petaling Jaya, Selangor, MALAYSIA TEL: (03) 7805-3263 IRELAND Roland Ireland G2 Calmount Park, Calmount Avenue, Dublin 12 Republic of IRELAND TEL: (01) 4294444 COSTA RICA JUAN Bansbach Instrumentos Musicales Ave. 1. Calle 11, Apartado 10237, San Jose, COSTA RICA TEL: 258-0211 IRAN MOCO INC. No. 41 Nike St. , Dr. Shariyati Ave. , Roberoye Cerahe Mirdamad Tehran, IRAN TEL: (021)-2285-4169 U. [. . . ]