User manual ROLAND RG-3M

[. . . ] 201b Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (p. 2), "USING THE UNIT SAFELY" (p. 3­5), and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. [. . . ] 10. Press the [Moving Key] (Enter) button. The User Program Set is saved to the User memory or USB memory. Press the [Function] (Exit) button so the indicator goes out. When there is no User Program set assigned to a number, this is indicated in the display in the following form: "2: (Empty). " fig. 05-150d The following appears in the screen if you attempt to save a User Program Set to a number to which a User Program Set has already been saved. fig. 05-160d If you save performance settings to a number that already has User Programs saved to it, the previously saved User Programs are then deleted. To delete the saved set of User Programs and save the new performance settings to that number, press the [Moving Key] (Enter) button. If you do not want to delete the saved User Programs, press the [Function] (Exit) button to cancel the save. When deleting the set of saved User Programs, refer to "Deleting Saved User Program Sets" (p. User Program Registration Loading Saved User Program Sets You can load sets of User Programs saved in User Memory (p. 25) or to USB memory individually to the RG-3M. * When loading User Programs from USB memory, connect the USB memory to the Ext Memory port (p. 22). NOTE Note that when a User Program Set are loaded, all of the performance settings stored in the RG-3M are deleted. 1. 2. Press the [Function] (Exit) button, getting its indicator to light. Press the [Song] (Select -) button or [ display the USER PROGRAM screen. fig. 05-020d ] (Select +) button to 3. Press the [Song] (Select -) button or [ "LOAD" is flashing. fig. 05-180d ] (Select +) button so 4. Press the [Moving Key] (Enter) button. The following screen appears. fig. 05-190d 5. Press the [Song] (Select -) button or [ the "from" setting is flashing. fig. 05-200d ] (Select +) button so that 6. Press the [ ] (Value -) button or [ change the "from" setting. Display Ext Memory Description ] (Value +) button to User Memory Loads User Programs saved in the User Memory. Loads User Programs saved in USB memory. 86 Chapter 5. 8. Press the [Moving Key] (Enter) button. Press the [Song] (Select -) button or [ ] (Select +) button so that the User Program Set number is flashing. fig. 05-210d 9. 10. Press the [ ] (Value -) button or [ ] (Value +) button to select the number of the User Program Set to be loaded. Press the [Moving Key] (Enter) button. A confirmation message appears in the screen. fig. 05-220d NOTE When calling up User Programs saved in USB memory, do not remove the USB memory from the Ext Memory port until the settings have been called up. To return to the original screen without loading the User Program Set, press the [Function] (Exit) button. 11. Press the [Moving Key] (Enter) button once more. The selected User Program Set is loaded to the RG-3M. 87 Chapter 5. User Program Registration Deleting Saved User Program Sets You can delete individual User Program Sets saved to USB memory or in User Memory (p. * When deleting User Programs from USB memory, connect the USB memory to the Ext Memory port (p. 2. Press the [Function] (Exit) button, getting its indicator to light. Press the [Song] (Select -) button or [ display the USER PROGRAM screen. fig. 05-020d ] (Select +) button to 3. Press the [Song] (Select -) button or [ the "DEL" (Delete) is flashing. fig. 05-240d ] (Select +) button so that 4. Press the [Moving Key] (Enter) button. The following screen appears. fig. 05-250d 5. Press the [Song] (Select -) button or [ the "Dest" setting is flashing. fig. 05-260d ] (Select +) button so that 6. Press the [ ] (Value -) button or [ change "Dest" setting. Display Ext Memory Description ] (Value +) button to User Memory Deletes the User Programs saved in the User Memory. Deletes the User Programs saved in USB memory. 88 Chapter 5. User Program Registration 7. Press the [Song] (Select -) button or [ ] (Select +) button so that the User Program Set number is flashing. fig. 05-270d 8. 9. Press the [ ] (Value -) button or [ ] (Value +) button to select the number of the User Program Set to be deleted. [. . . ] Warehouse Area `DEPO' Pf. 83 H-2046 Torokbalint, HUNGARY TEL: (23) 511011 MIDDLE EAST BAHRAIN Moon Stores No. 1231&1249 Rumaytha Building Road 3931, Manama 339 BAHRAIN TEL: 17 813 942 COLOMBIA Centro Musical Ltda. Cra 43 B No 25 A 41 Bododega 9 Medellin, Colombia TEL: (574)3812529 PERU Audionet Distribuciones Musicales SAC Juan Fanning 530 Miraflores Lima - Peru TEL: (511) 4461388 MALAYSIA Roland Asia Pacific Sdn. 45-1, Block C2, Jalan PJU 1/39, Dataran Prima, 47301 Petaling Jaya, Selangor, MALAYSIA TEL: (03) 7805-3263 IRELAND Roland Ireland G2 Calmount Park, Calmount Avenue, Dublin 12 Republic of IRELAND TEL: (01) 4294444 COSTA RICA JUAN Bansbach Instrumentos Musicales Ave. 1. Calle 11, Apartado 10237, San Jose, COSTA RICA TEL: 258-0211 IRAN MOCO INC. [. . . ]