User manual ROLAND RP-201

[. . . ] Owner's Manual Thank you, and congratulations on your choice of the RP201. 201a Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. 202 Copyright © 2009 ROLAND CORPORATION All rights reserved. [. . . ] Never turn off the power while "dEL" is flashing in the display. 6. Press the [Song] or [Metronome] button to leave Function mode. 33 Various Settings In Function mode you can make various settings for performance and recording. Button Function Dual Balance p. 35 [Split] (& [­] [+]) Page Basic Operation in Function Mode 1. Hold down the [Song] button and press the [Metronome] button. fig. RP201Function. eps Octave Shift p. 38 [Piano] (& [­] [+]) Temperament Key p. 39 The [Song] button and [Metronome] button will light. The display will indicate "Fnc" and you'll be in Function mode. The [Reverb], [Transpose], [Split], [Piano], [E. Piano], [Strings] and [Others] buttons flash. fig. d-Fnc. eps Stretch Tuning p. Press one of the blinking buttons to select the setting you want to change. The display shows the name of the setting while you hold down the button. The value of the setting will appear when you release the button. [E. Piano] (& [­] [+]) String Resonance p. Use the [­] [+] buttons to change the setting. If you want to change a different setting, select the setting you want to change by pressing one of the buttons that were blinking before step 2. [Strings] (& [­] [+]) Center Pedal Function p. Press the [Song] or [Metronome] button to leave Function mode. The button indicators will return to their former state. The settings you change will return to their original state when you turn off the power. If you want your changes to be retained even after the power has been turned off, carry out the Memory Backup procedure (p. 44) to save the settings. Local Control p. 42 Button [Reverb] Function Twin Piano Mode Page p. 36 [Others] (& [­] [+]) Composer MIDI Out p. 44 Save a Song [Transpose] (& [­] [+]) Deleting songs Transpose Mode Press [ seconds ] for several 34 Various Settings 4. Use the [­] [+] buttons to change the setting. Keyboard Settings Setting Explanation Keyboard notes Changing the Volume Balance for Dual Play (Dual Balance) You can change the volume balance of Tones 1 and 2. Song playback Keyboard notes and song playback 1. Hold down the [Song] button and press the [Metronome] button. The display will indicate "Fnc" and you'll be in Function mode. 5. [. . . ] 34 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 MIDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Remembering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]