User manual ROLAND RP201

[. . . ] Owner's Manual Thank you, and congratulations on your choice of the RP201. 201a Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. 202 Copyright © 2009 ROLAND CORPORATION All rights reserved. [. . . ] Piano], [Strings] and [Others] buttons flash. fig. d-Fnc. eps Stretch Tuning p. Press one of the blinking buttons to select the setting you want to change. The display shows the name of the setting while you hold down the button. The value of the setting will appear when you release the button. [E. Piano] (& [­] [+]) String Resonance p. Use the [­] [+] buttons to change the setting. If you want to change a different setting, select the setting you want to change by pressing one of the buttons that were blinking before step 2. [Strings] (& [­] [+]) Center Pedal Function p. Press the [Song] or [Metronome] button to leave Function mode. The button indicators will return to their former state. The settings you change will return to their original state when you turn off the power. If you want your changes to be retained even after the power has been turned off, carry out the Memory Backup procedure (p. 44) to save the settings. Local Control p. 42 Button [Reverb] Function Twin Piano Mode Page p. 36 [Others] (& [­] [+]) Composer MIDI Out p. 44 Save a Song [Transpose] (& [­] [+]) Deleting songs Transpose Mode Press [ seconds ] for several 34 Various Settings 4. Use the [­] [+] buttons to change the setting. Keyboard Settings Setting Explanation Keyboard notes Changing the Volume Balance for Dual Play (Dual Balance) You can change the volume balance of Tones 1 and 2. Song playback Keyboard notes and song playback 1. Hold down the [Song] button and press the [Metronome] button. The display will indicate "Fnc" and you'll be in Function mode. 5. Press the [Song] or [Metronome] button to leave Function mode. You can use the Memory Backup function to store this setting in internal memory (p. Press and hold the [Split] button and use the [­] or [+] button to select "dbL. " 3. Release the [Split] button to see the current setting. The current volume balance is shown. fig. d-9-3-e. eps Changing the Pitch in Octave Steps (Octave Shift) You can change the pitch of Tone 2 in Dual Play (p. 23) and the Lefthand tone in Split Play (p. 24) an octave at a time. Volume of Tone 1 Volume of Tone 2 Altering the pitch in one-octave units in this way is called "Octave Shift. " For example, you can raise the pitch of the Left-hand Tone to the same pitch as the Right-hand Tone in Split Play. 4. Use the [­] [+] buttons to change the setting. The volume balance will change. If you want to return to the original volume balance, press the [­] and [+] buttons simultaneously. 1. Hold down the [Song] button and press the [Metronome] button. The display will indicate "Fnc" and you'll be in Function mode. 5. [. . . ] 15, 20 Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Headphones Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 I Input Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 J Just . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]