User manual ROLAND S-MADI

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ROLAND S-MADI. We hope that this ROLAND S-MADI user guide will be useful to you.

Lastmanuals help download the user guide ROLAND S-MADI.

Download

Manual abstract: user guide ROLAND S-MADI

Detailed instructions for use are in the User's Guide.

 [. . . ] Owner's Manual
Before using this unit,  carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (p. 2),  "USING THE UNIT SAFELY" (p. These sections provide important information concerning the proper operation of the unit. Additionally,  in order to feel assured that you have gained a good grasp of every feature provided by your new unit,  Owner's Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. 

Copyright © 2010 ROLAND CORPORATION All rights reserved.  [. . . ] BNC This lights up when the INPUT switch on the rear panel is set to [BNC]. 64CH This lights up when the CH MODE switch on the rear panel is set to [64CH]. 56CH This lights up when the CH MODE switch on the rear panel is set to [56CH]. 1-40 This lights up when the CH OFFSET switch on the rear panel is set to [1-40]. 41-56 This lights up when the CH OFFSET switch on the rear panel is set to [41-56 (64)]. 

2. LOCK STATUS Indicator
This displays the lock status of the sampling clock. It lights up when the clock source is locked normally. It flashes when the lock experiences a problem. 

3. SAMPLE RATE Indicator and SELECT Button
These set and display the sampling rate. Press the SELECT button to choose either 44. 1 kHz or 48 kHz. Select the sampling rate that matches the signals output from the source device. This lights up when the clock source is locked normally. It flashes when the lock experiences a problem. 
* Selecting [REAC] as CLOCK SOURCE makes the SELECT button for SAMPLE RATE light up and allows you to change the setting. * You can press the SELECT button for SAMPLE RATE and change the setting only when it is illuminated. When dark,  activating the button is disabled. * Selecting [MADI] or [WORD CLOCK] as CLOCK SOURCE automatically sets the S-MADI's sampling rate to match with MADI or WORD CLOCK input. The S-MADI supports sampling rates of 44. 1 kHz and 48 kHz. The S-MADI cannot convert sampling rate. Sampling rate of all connected equipment must be identical. 

5. REAC MAIN Indicator and SELECT Button
These set and display the S-MADI's REAC mode. Press the SELECT button to choose one of the REAC modes described below. MASTER Audio signals are sent to slave and split devices.  [. . . ] This means that slight difference may occur between the input and output. When splitting signals input from a source device to other devices,  use a commercially available split connector (p. 15). 

Input and output are not possible. 
Is the sampling rate of the connected equipment set to 44. 1 kHz or 48 kHz?The S-MADI supports sampling rates of 44. 1 kHz and 48 kHz.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLAND S-MADI

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLAND S-MADI will begin.