User manual ROLAND SR-JV80-03

[. . . ] The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet. 001 · Before using this unit, make sure to read the instructions below, and the Owner's Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 002a · Do not open or perform any internal modifications on the unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . · Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). [. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 013 · In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 014 · Protect the unit from strong impact. (Do not drop it!) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . · This unit should be used only with a rack or stand that is recommended by Roland. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 005 2 · Try to prevent cords and cables from becoming entangled. Also, all cords and cables should be placed so they are out of the reach of children. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 104 118 · Should you remove nuts, washers, screws, anchor bolts, etc. , make sure to put them in a safe place out of children's reach, so there is no chance of them being swallowed accidentally. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . · Never climb on top of, nor place heavy objects on the unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMPORTANT NOTES 291a In addition to the items listed under "USING THE UNIT SAFELY" on page 2­3, please read and observe the following: Placement 354b 402 · Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Also, do not allow lighting devices that normally are used while their light source is very close to the unit (such as a piano light), or powerful spotlights to shine upon the same area of the unit for extended periods of time. Excessive heat can deform or discolor the unit. 355b · Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation. Additional Precautions 553 · Use a reasonable amount of care when using the unit's buttons, sliders, or other controls; and when using its jacks and connectors. Rough handling can lead to malfunctions. 556 · When moved from one location to another where the temperature and/or humidity is very different, water droplets (condensation) may form inside the unit. Tighten the wing nut to obtain the desired movement. Use the included felt washer and the wing nut. Panel Description Wing Nut Felt Washer Pad Face Bow Portion Edge Portion Output Jack Take care to ensure that the cables do not touch the cymbal units and/or the stand. A cable touching a cymbal unit or a stand may cause double sounding or other incorrect operation. Connecting to a Percussion Sound Module 921 To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. 6 SR-JV80-03 1. Use the included connection cable and connect the output jack of the SR-JV80-03 to the trigger input jack of the percussion sound module. Connect the L-shaped plug of the included cable to the CY8. This will prevent strain from being applied to the SR-JV80-03. Edge Shot This playing method involves striking the edge with the shoulder of the stick. It corresponds to the sound of the "rimside" of the connected trigger input. To make use of edge shot and choking play techniques, you'll need to connect to a trigger input jack on the percussion sound module that accommodates rim shots. To make use of edge shot, you'll need to connect to a trigger input jack on the percussion sound module that accommodates rim shots. Edge 2. Leave some slack in the cable to ensure that they are not pulled by the movement of the SR-JV80-03 when struck. fig. CY04a. e Choking Choking (pinching) the cymbal's edge with the hand immediately after hitting the cymbal makes the sound stop. Leave some slack in the cable 3. Make the trigger settings for the percussion sound module. 12. To make use of choking play techniques, you'll need to connect to a trigger input jack on the percussion sound module that accommodates rim shots. Should you neglect to make the appropriate settings for the percussion sound module, you could likely experience the following problems: · Sometimes it does not sound (uneven volume) · The volume is too low (reduced sensitivity) For information on how to change the parameters for a percussion sound module, refer to the documentation for the percussion sound module you're using. Specifications SR-JV80-03: Cymbal Pad Pad Size: 12 inches Triggers: 2 (Bow, Edge) Dimensions: 290 (W) x 295 (D) x 45 (H) mm 11-7/16 (W) x 11-5/8 (D) x 1-7/8 (H) inches Weight: 650 g / 1 lb 7 oz Accessories: Owner's Manual, Connection Cable, Wing Nut, Felt Washer, Stopper Options: Cymbal Mounts (MDY-7U, MDY-10) Drum Stands (MDS-3C, MDS-6, MDS-8C, MDS-10, MDS-20) 962a Playing the SR-JV80-03 Bow Shot This is the most common playing method, playing the pad face of the cymbal. It corresponds to the sound of the "head-side" of the connected trigger input. Bow In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice. 7 KD-8 Features · Velocity sensitive pad provides rich expression. · Vertical trigger surface for extremely quiet performance. Loosen the stand's anchor bolts and remove the foot plate. When Using on the Carpet When using on the Floor · The tips of the anchor bolts are sharp. [. . . ] Use the included connection cable and connect the output jack of the KD-8 to the trigger input jack of the percussion sound module. Connect the L-shaped plug of the included cable to the KD-8. This will prevent strain from being applied to the KD-8. 2. Make the trigger settings for the percussion sound module. 12. Should you neglect to make the appropriate settings for the percussion sound module, you could likely experience the following problems: · Sometimes it does not sound (uneven volume) · The volume is too low (reduced sensitivity) For information on how to change the parameters for a percussion sound module, refer to the documentation for the percussion sound module you're using. Specifications KD-8: Kick Trigger Unit Dimensions: Weight: Accessories: 272 (W) x 260 (D) x 405 (H) mm 10-3/4 (W) x 10-1/4 (D) x 16 (H) inches 2. 9kg / 6 lbs 7 oz Owner's Manual, Connection Cable, Screws 962a In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice. 10 FD-8 Features Adjusting the Travel of the Pedal This hi-hat controller pedal features freely adjustable pedal plate angle and tension. [. . . ]