User manual ROLAND SRJV80-03

[. . . ] When referring to the Owner's Manual, you can find the information you are looking for by checking the Table of Contents, and Index in each page. QUICK START Contensts Getting Ready. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installing the Wave Expansion Board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installation de la carte d'extension Wave (French language for Canadian Safety Standard) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connecting to MIDI Devices and Audio Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Turning the Power On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Pour resserrer, tourner dans le sens des aiguilles d'une montre. q Lors de l'insertion de la carte d'extension Wave, enlevez seulement les vis indiquées dans les instructions. q Veillez à ne pas laisser tomber de vis dans le châssis du SRJV80-03. q Ne pas laisser le panneau de protection avant détaché. S'assurer de l'avoir rattacher après avoir installé le disque dur. q Ne touchez aucun des circuits imprimés ni les bornes de connexion. q Veillez à ne pas vous couper les doitgs sur le bord de l'ouverture d'installation. q Ne jamais forcer quand vous installez une carte de circuits. Si la carte ne rentre pas correctement, ressortez-la et ressayez. q Quand la carte est installée, vérifiez si l'installation est correcte. Pour installer une carte d'extension (vendue en option dans les séries SRJV80 et SRX), détacher la plaque du dessus. Turn the VALUE dial or press the [INC]/[DEC] button to select a category, and then press [ENTER] to confirm the selection. What is a Patch?With the SRJV80-03, the basic sound component used in a usual performance is referred to as a "Patch. " A single Patch can be created by combining up to four different tones. Although a Patch could consist of only a single tone, using multiple tones allows you to create Patches with more complexity and vividness. Not only can you get fat, rich sounds by layering sounds using the internal Patches already available with the SRJV80-03 as is, you can also enjoy a high degree of control in creating sounds, for example having different tones sound depending on the range used, or the strength with which the keys are played. Furthermore, the SRJV80-03's parameters are arranged in sets for even more effective management of elements used in editing Patches, including the manner in which sounds are output, control of the outputs, and effects processing. What is a Tone?The tone is the smallest unit of sound handled by the SRJV80-03. Although a sound could be created using simply one tone, the SRJV80-03 handles the sounds used for performances in terms of Patches, which are a combination of a number of tones. In other words, tones are the components of sound from which Patches are composed. What is a Category?The SRJV80-03's sounds are organized into Categories, depending on their characteristics. The SRJV80-03 features 38 Categories divided into 10 Category Groups. 17 Playing Sounds Making Selections with Basic Operations fig. 16. e VALUE dial INC/DEC button SHIFT button On the PATCH PLAY page Selecting with the VALUE Dial Rotate the VALUE dial to select. Holding down the VALUE dial while rotating it changes the value by tens (the value can be similarly changed by tens by holding down the [SHIFT] button while rotating the VALUE dial). Selecting with the [INC] and [DEC] Buttons - Press the [INC] / [DEC] buttons to select. [. . . ] * Pressing the [UNDO] button restores Number to its original value, reselecting the original Patch. 7 1 2 3 4 5 Press the [EXIT] button to return to the PERFORM PLAY page. Changing the MIDI Reception Channel of Each Part Select the Performance you wish to use. Press the [MIDI] function select button to make its indicator light. Press the [ ]/[ ] button to choose the PART MIDI page. Press the [ ]/[ ] button to move the cursor to Channel. Press PART SELECT [1/9]­[8/16] to select the Part you wish to set. * To select Parts 9­16, press the [1-8/9-16] button to make its indicator light, and then press the desired PART SELECT [1/9]­[8/16] button. 6 7 Turn the VALUE dial or press the [INC]/[DEC] button to select the desired MIDI channel. Press [EXIT] to return to the PERFORM PLAY page. You can easily play multiple Parts ­ and their Patches ­ simultaneously by setting them to the same MIDI reception channel. 26 Playing Sounds Having Different Patches Play In Separate Ranges of the Keyboard (Split) In a Performance, by selecting the same MIDI receive channel for a number of parts and then changing the pitch range over which each part is to be played, you can thus divide the keyboard into separate ranges and assign a different Patch to each range. The split is one application of the layer technique (Playing Multiple Layered Patches). The split works by changing the sounding range of each patches of the layered parts. Now, try a creating a split using Performance "PR-B:29 Organ/Lead. " Selecting a Performance "PR-B:29 Organ/Lead" fig. 31. e 1 2 3 Press the [PERFORM] button to make its indicator light. Press the [PRESET] button to make its indicator light. Press the [B] button to make its indicator light. The page for selecting Preset-B Performances appears. fig. 32. e 4 Turn the VALUE dial to select "29. " Play your MIDI keyboard (MIDI transmit channel = 1). [. . . ]