User manual ROLAND UM-ONE

[. . . ] For the following languages, a PDF version of the Owner's Manual can be found on the CD-ROM. Deutsch, Français, Italiano, Español, Português, Nederlands What is MIDI? MIDI is an internationally recognized standard for exchanging performance information between electronic musical instruments and computers. For example, in the illustration below, a MIDI signal meaning "the `C' key on the MIDI keyboard was pressed" passes through the UM-ONE and is received by the computer's software sound module, and then the software sound module plays the note "C. " Software sound module MIDI signal "C" is played Information meaning "the `C' key was pressed" "C" key is pressed In this way, MIDI is used to send performance information to other instruments; for example "the `C' key was pressed with a certain amount of force, " "the instrument was changed to a violin sound, " "the volume was raised/lowered, " "the pitch was raised/lowered, " etc. In other words, MIDI is the "language of musical instruments. " MIDI signals are merely performance instructions, therefore a MIDI sound module, such as a software sound module, is required to produce sound. All software sound modules and DAW (Digital Audio Workstation) software support MIDI. * DAW software is a term that refers to music production software, such as SONAR. Note Do not connect the UM-ONE to the computer until the driver has been installed (p. [. . . ] (Windows XP) Are other programs or resident programs (such as antivirus programs) running?Warning or error appears during installation (Windows) In the "Device Manager, " do you see "Other device, " "Unknown device, " or a device for which "?, " "!, " or "x" is displayed?Is your computer running on battery power?Installer does not exit Other than a mouse and keyboard, are any USB devices connected?Is the UM-ONE connected to a USB hub that is connected to a power supply?"Found New Hardware Wizard" appears again after driver was installed (Windows XP) Resolution You cannot install from a networked CD-ROM drive. Log on to the computer with a user account that has administrator privileges. For details, consult the administrator for your computer system. Change the "Driver Signing Options" setting (p. Be sure to exit all other programs before installation. Reinstall the UM-ONE driver (p. 22). Connect the power cord to the computer. Make sure that there are no USB devices connected to the computer (other than a mouse and keyboard) during installation. Use a USB hub that connects to a power supply. If you change the USB connector to which the UM-ONE is connected, the "Found New Hardware Wizard" may appear again even if the driver has already been installed on the computer. Follow step 9 of the driver installation procedure (p. 11) and install the driver. Did you connect the UM-ONE to a different USB connector than the one you used when installing the driver? 16 Troubleshooting Problem Confirmation Resolution If you connect the UM-ONE to a different USB connector than the one you used when installing the driver, a numeral may appear with the device name. To have the device name appear without the numeral, connect the UM-ONE to the same USB connector used during installation, or reinstall the driver (p. 22). Numeral such as "2-" appears at beginning of device name (Windows) Did you connect the UM-ONE to a different USB connector than the one you used when installing the driver? Using the UM-ONE Problem Confirmation Is the driver installed?Make sure that the UM-ONE is connected to the computer correctly. If the problem is not resolved, reinstall the driver (p. Exit all programs that are using the UM-ONE, disconnect the UM-ONE's USB cable, and then reconnect it. If the problem is not resolved, reinstall the driver (p. [. . . ] Start up the computer without the UM-ONE connected. Disconnect all USB cables other than those for a USB keyboard and/or USB mouse (if used). 2. Insert the included CD-ROM into the computer's CD-ROM drive. Double-click [Uninstaller] in one of the following folders on the included CD-ROM. Operating System Mac OS X 10. 6 or later Mac OS X 10. 5 or earlier Folder Open [Driver], and then [10. 6] Open [Driver], and then [10. 4_10. 5] 4. When "This uninstalls UM-ONE driver from this Macintosh. " appears, click [Uninstall]. If other messages appear, follow the instructions on the screen. 5. [. . . ]