User manual ROLAND V-440HD

[. . . ] Owner's Manual 201b Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (p. 2), "USING THE UNIT SAFELY" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's Manual should be read in its entirety. [. . . ] Connect the right screen to the slaved V-440HD's HD OUT or RGB connectors. Making the Multi-Screen Settings After connecting the devices according to the procedures described on p. Set all of the V440HDs as described below. Multi Screen. " Connecting When Three or More Screens Are Used Using multiscreen output with three or more screens requires use of to distribute the video and MIDI signals for the master and multiple connected slaves. * Satisfactory image quality may not be obtainable using loop thru to distribute the video to three or more V-440HD. 3. Multi Screen Mode. " Select the screen layout. The master and slave values are set automatically. * For more on the screen position, refer to "Slave Numbers and Screen Positions. " [Connecting Diagram] HD Distributer [HD] 4. Multi Screen ID. " This sets the screen positions for the master and slave V-440HDs. Referring to "Slave Numbers and Screen Positions" below, make selections from Screen1-Master to Screen6-Slave. Assign Screen1Master to the V-440HD corresponding to the highest priority MIDI signal (the uppermost unit in the right figure on p. V-440HDs set to Screen2-Slave to Screen6-Slave become slave devices. * For more on the MIDI setting, refer to Controlling the V-440HD from an External Device Via MIDI and Linking Operations Via MIDI (p. 45). MIDI Master RGB Distributer [RGB] Slave1 Turning the Multi Screen Function On SD Distributer MIDI [SD] Slave2 1. When using multiscreen output with three or more screens, use to distribute the video to each input. * * Use an interface compatible with the format of the video being distributed. Make sure that the same type of video signals are input to each V440HD. If, for example, you are grouping S-Video signals in SD IN Channel 4, make sure that the signal formats are the same, even though the video may have the same field of view. 1. Select "On" for the master V-440HD's "1. After making the settings in Steps 1-4 of "Making the Multi Screen Function Settings" for all of the V-440HDs, select "On" in "1. Multi Screen On/Off" under "12. Multi Screen" in the menu for the master V-440HD. The Multi Screen function is switched on, and each V440HD displays the video corresponding to its assigned screen position. Turning the Multi Screen Function Off Select "Of" in "1. [. . . ] TRANSITION Indicator (HD/RGB) . . . . . . . . . . . . . . . . . . . . . . . . . . . TRANSITION Indicator (SD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 17 15 17 14 V VALUE Knob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VALUE knob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Video Fader (HD/RGB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]