User manual ROLAND VC-1 MANUAL 2

[. . . ] Owner's Manual Thank you, and congratulations on your choice of the Roland D-50 for V-Synth/ VariOS: VC-1. The VC-1 brings Roland's famed D-50 back to life in the form of the V-Synth/VariOS for an all-hardware simulation. Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's manual should be read in its entirety. [. . . ] 83) Connecting the V-Synth to Your Computer via USB (p. 86) Selecting the V-Synth's USB Storage Mode fig. 11-01(ModeMenuSystem) 1. 4. Turn off the power of VC-1 (V-Synth) once, then pull out the VC-1 from the PC CARD slot. Wait for the V-Synth to start up normally. Press [MODE] to access the V-Synth MODE MENU window. The SYSTEM Com Master screen appears. fig. 11-02(SystemGeneral) 5. 6. In the left side of the screen, touch the <MIDI USB> tab. The SYSTEM Com USB Setting window appears. 83 Connecting to Your Computer via USB fig. 11-03(System_UsbSetup) 7. Touch <OK>. fig. 11-04(Warning) 9. When a WARNING window like the following appears, touch <ACCEPT> to close the window. 10. In the lower right of the SYSTEM Com MIDI/USB screen, touch <Write> to save the system settings. Connecting the V-Synth to Your Computer via USB The installation procedure will differ depending on your system. Please proceed to one of the following sections, depending on the system you use. 85) Windows XP/2000/Me/98 fig. 11-05(ModeMenuUsb) 1. 7. Make sure that the power of the VC-1 is turned off. Connect the V-Synth and your computer using a USB cable. Insert the VC-1 into the PC CARD slot of the V-Synth rear panel. Press [MODE] to access the V-Synth MODE MENU window. The USB Storage screen appears. 84 Connecting to Your Computer via USB fig. 11-06(Connect) 8. Touch <PC Card> to establish the connection with your computer. When the USB connection is established for first time, the driver installation will begin. A dialog box of "Found new hardware" will appear near the Windows task tray. When installation is completed, open My Computer and you will see a new drive icon. OS Windows 98/Me/2000 Windows XP Icon name Removable Disk VC-1 9. Once the V-Synth is connected, you can recover system files by operating your computer. 86) Macintosh fig. 11-05(ModeMenuUsb) 1. [. . . ] NSW 2099 AUSTRALIA TEL: (02) 9982 8266 SAUDI ARABIA aDawliah Universal Electronics APL Corniche Road, Aldossary Bldg. , 1st Floor, Alkhobar, SAUDI ARABIA P. O. Box 2154, Alkhobar 31952 SAUDI ARABIA TEL: (03) 898 2081 RUSSIA MuTek 3-Bogatyrskaya Str. 1. k. l 107 564 Moscow, RUSSIA TEL: (095) 169 5043 Roland Shanghai Electronics Co. , Ltd. No. 18 Anhuaxili Chaoyang District, Beijing 100011 CHINA TEL: (010) 6426-5050 BELGIUM/HOLLAND/ LUXEMBOURG Roland Benelux N. V. Houtstraat 3, B-2260, Oevel (Westerlo) BELGIUM TEL: (014) 575811 SPAIN Roland Electronics de España, S. [. . . ]