User manual ROLAND VS-2000CD

[. . . ] USING THE UNIT SAFELY Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly. Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. * Material damage refers other adverse effects respect to the home furnishings, as well animals or pets. to damage or caused with and all its to domestic The symbol alerts the user to important instructions or warnings. The specific meaning of the symbol is determined by the design contained within the triangle. [. . . ] Press F1 (CREATE) to create the next playlist segment. The VS-2000 creates a new segment with the same settings as the segment before it. Since you can't set a Start marker number to be higher than an End marker's number, set the new segment's End marker number first. If you ever find you can't raise a segment's Start marker number, check the segment's End marker number to make sure that it's set higher than the desired Start marker. Cursor to the segment's End marker number. Turn the Time/Value dial to select the marker at the end of the section you want to use in the second segment. Cursor to the segment's Start marker number. Turn the Time/Value dial to select the marker at the start of the section. Repeat Steps 6-11 for all of the desired remaining playlist segments. If you need to change the settings for any segment, cursor to the desired settings and change them. You can press: · · · F2 (AllClr)--to clear all of the segments from the playlist. F3 (DELETE)--to clear the currently selected segment. F4 (Insert)--to add a new segment above the currently select segment. Placing and Activating a New Playlist Once you've created the new playlist, you must place it at the desired location in the project in order to activate it. Press F5 (NEXT)--the ARRANGE TO screen appears. Roland VS-2000 Owner's Manual www. RolandUS. com 271 20--Region Editing Operations The TO location is the place in the project where the playlist is to start. If you select a TO location that's before or somewhere in the middle of the project's currently active playlist, the new playlist is placed on top of the older one, taking the place of the older playlist wherever they overlap. If you position the new playlist after the currently active playlist, a new marker is automatically placed at the start of the new playlist to make it easy to navigate to. You can: · dial in the desired location using the Time/Value dial. · move the now line to the desired location using the current time location display at the top of the screen, and then press F2 (GetNow). To move the now line to the current TO location, press F3 (GO TO). Press F5 (OK) to activate and place the playlist in the project, F1 (<<BACK) to return to the main ARRANGE screen, or F6 (EXIT) to cancel the ARRANGE operation. NAME Use: TRACK menu The VS-2000 allows you to name any of the tracks in a project. The main NAME screen provides a track selection display where you can select the track you want to name. To learn about the VS-2000's naming tools, see "Naming" on Page 74. TRACK menu F5 (NAME) Why You'd Use Region NAME Naming a track allows you to easily identify it on a connected optional VGA display and when you're selecting tracks during editing. 272 www. Roland. com Roland VS-2000 Owner's Manual 21--Working with the VS-2000 Outputs The VS-2000 offers a range of analog output jacks and digital connectors from which you can send its audio signals to external devices. This chapter discusses how to route signals to them and how they can be used. The VS-2000 Outputs Output Pairs The VS-2000's analog and digital outputs are managed as left/right or odd/even output pairs when you're routing signals to them. These pairs can't be altered. Analog Output Jacks The VS-2000 has six analog output jacks that you can connect to external devices when you want to send audio signals out of the VS-2000. [. . . ] No. 41 Nike St. , Dr. Shariyati Ave. , Roberoye Cerahe Mirdamad Tehran, IRAN TEL: (021) 285-4169 MALAYSIA BENTLEY MUSIC SDN BHD 140 & 142, Jalan Bukit Bintang 55100 Kuala Lumpur, MALAYSIA TEL: (03) 2144-3333 As of August 20, 2004 (ROLAND) Information For EU Countries CAUTION Apparatus containing Lithium batteries Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions. ADVARSEL! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. [. . . ]