User manual ROLAND VS-2400 CD APPENDICES

[. . . ] Appendices Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (Owner's Manual p. 2), "USING THE UNIT SAFELY" (Owner's Manual p. 3), and "IMPORTANT NOTES" (Owner's Manual p. These sections provide important information concerning the proper operation of the unit. [. . . ] When using with Phones Off fig. 08-18e When using with Phones On For Stereo Speakers This sound is made to be played specifically through speakers. The proper effect cannot be obtained if listened to through headphones. Less reflections from the wall or floor are better. If a hard wall is close to it, draw a curtain. For Headphones This sound has been made specifically for playing through headphones. You cannot obtain the proper effect if listening through speakers. Speaker should be placed as far away as possible from the wall or floor. SP EA KE R SP EA KE R 24 to 30 . 71 Algorithm List Mic Modeling (Microphone Modeling) This modifies sound that was recorded by a conventional dynamic mic, lapel mic or direct line, causing it to sound as though it had been recorded by an expensive condenser mic or a special studio mic. The mic simulator can add effects of proximity or distance. fig. 08-67 Input A Mic Converter A Output A BassCut A Distance A Limiter A Link Mic Converter B Bass Cut B Distance B Limiter B Output B Input B Selecting the microphone used for recording. Input of Mic Converter selects the type of microphone to be used recording. DR-20: Sml. Dy: Hed. Dy: Min. Cn: Flat: C3000B: Roland DR-20 (dynamic microphone manufactured by Roland) Small Dynamic Microphone (dynamic microphone used for instruments and vocal) Head-worn Dynamic Microphone (headset-type dynamic microphone) Miniature Condenser Microphone (very small condenser microphone) Line input AKG C3000B (Condenser microphone manufactured by AKG) Microphone types that can be modeled The characteristics of the low-end general-purpose microphone are converted into the characteristics of the Highend microphone for studio application. You can add sound quality changes to already recorded sounds just as if a different type of microphone were used or if they were recorded at a different distance. In addition, it is possible to add microphone characteristics to line-recorded instrumental sounds. These characteristics can be set up by selecting the relevant value for Out of Mic Converter. Sml. Dy: Voc. Dy: Lrg. Dy: Sml. Cn: Lrg. Cn: Vnt. Cn: Flat: Dynamic microphone for general musical instruments and vocal sounds. Ideal for a guitar amplifier and snare drums. Dynamic microphone for standard vocal sounds. Characterized in middle frequency band sounds with tension. Dynamic microphone with a extended low frequency band. Small condenser microphone for musical instruments. Characterized in bright High frequency band sounds. For metal percussion and acoustic guitars. Condenser microphone with flat characteristics. For vocal, narration and live musical instruments. Microphone with flat frequency response. For removing peculiarity of the microphone used for recording sounds. * When a condenser-type mic is selected in OUT, low-range noise transmitted through the mic stand may be accentuated due to the mic's low range characteristics. [. . . ] DE PANAMA TEL: 315-0101 HUNGARY Roland East Europe Ltd. Warehouse Area `DEPO' Pf. 83 H-2046 Torokbalint, HUNGARY TEL: (23) 511011 INDONESIA PT Citra IntiRama J1. 15J-150 Jakarta Pusat INDONESIA TEL: (021) 6324170 CYPRUS Radex Sound Equipment Ltd. 17, Diagorou Street, Nicosia, CYPRUS TEL: (022) 66-9426 CHILE Comercial Fancy II S. A. [. . . ]