User manual ROLLEI D210 MOTION

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Press the shutter button to capture a "zoomed" image. 2X E NOTE · You can only set the digital zoom at the resolution of 1600x1200 pixels; digital zoom is not available at the resolution of 800x600 pixels. When you play back a "digitally zoomed" image, the image size is 800x600 pixels. · The more the image is enlarged, the more pixilated (grainier) the image. · Digital zoom cannot be used in the movie mode. 19 Using the self-timer The self-timer duration is 10 seconds. After the activation of the self-timer by pressing the shutter button, the self-timer lamp starts blinking slowly for 7 seconds and then blinking faster for the rest of 3 seconds. This allows you to get into the scene when taking group images. E 1. Secure the camera to a tripod or place it on a stable surface. Open the lens cover, turn mode dial to the mode, and power on the camera. The icon appears on the LCD monitor and status LCD. After ten seconds, the camera takes an image. To cancel self-timer photography at any time, press the shutter button to disrupt the sequence. NOTE · After one shot is taken, the self-timer mode is turned to off. 20 Using the macro mode Use the macro mode to shoot a close-up of the subject, such as flowers or insects. The effective range is between 30cm and 80cm. Open the lens cover, turn the mode dial to the mode, and power on the camera. Move the focus switch located on the front position. side of the camera to the The icon appears on the LCD monitor and status LCD. Press the shutter button. To disable macro photography, slide the focus switch back to normal. E NOTE · When shooting a close-up in macro mode, use the image LCD monitor to compose your shot, avoiding the off-center parallax phenomenon. · There is not a distinct point (subject range) at which normal mode is favored over macro mode; take in image an both optical modes and compare the results. · After a macro shot is taken DO NOT FORGET to reset the lens to the normal position. Using the flash The flash is designed to function automatically when lighting conditions warrant the use of flash. You can take an image using a flash mode suitable to your circumstances. If you change the flash mode, the camera will retain that setting even if the camera is turned off. Open the lens cover, turn the mode dial to the mode, and power on the camera. Press the button located on top of the camera repeatedly until your desired flash mode appears. [. . . ] After removing the batteries from the camera, the date and time will return to the default setting. If this happens, reset the date and time when using the camera. E [YEAR], [MONTH], [DAY], [TIME] LANGUAGE This option allows you to select the language for the menus and the text displayed on the LCD monitor. Press the OK button to enter the LANGUAGE sub-menu. And then select the preferred language using the / button and press the OK button. [. . . ]