User manual ROLLEI DA20

[. . . ] Never mix batteries of different brands. Should the product develop an odd smell, carefully remove the batteries and have these and the binoculars examined by your dealer. If you will not use the product for a prolonged time, remove the batteries and store them separately. > To avoid damage to the product, do NOT keep it in the following environments: ­ At temperatures above 70°C. ­ In a car parked with closed windows. [. . . ] To select a mode or take pictures, press the right (Shutter/Set) button. Explanation of mode icons SD card High resolution (1600 x 1200) Low resolution (640 x 480) Self-timer (10 s delay) Delete last image Delete all images Format SD card (all images will be deleted) Continuous shooting (video clips; images saved as an AVI file) Power Off 12 DIGITAL CAMERA MODES Mass storage "PC" will be displayed when DigitalBino is connected to a computer via USB cable , , ". SD card full , , " will be displayed when the SD card is full. SD-card warning , , " will blink when the camera is unable to access the SD card. If no action is taken after selecting one of these modes, the camera will automatically switch back to photo mode after 10 seconds. To power up in mute mode, press Mode/ Power and Shutter/Set buttons simultaneously. Mute mode (without sound) Normal (with sound) 13 INSERT OF THE SD CARD / USING THE BINOCULARS Insert of the SD card SD card lid shut Adjusting for eyeglass wearers For optimum viewing comfort, fold down the rubber eyecups and place your eyeglasses against them. Adjusting the eyepieces The distance between your eyes is called interpupillary distance. It is important to adjust the binoculars to your interpupillary distance before use. To do this, hold the binoculars firmly in the normal viewing position and adjust the barrels by pushing them together or pulling them apart until you see a single circular field with both eyes. SD card lid open Contacts facing up 14 USING THE CAMERA Focusing the binoculars Using the camera Use your DigitalBino in good lighting conditions and avoid facing light sources directly. Remember that photographic subjects should be at least 15 meters away. To take a picture, hold your DigitalBino absolutely steady and press the Shutter/Set button until you hear a beep sound. Failure to hold the unit steady may prevent proper focusing and result in blurred pictures. > > > > Set the Diopter Knob on the underside to its center point between + and -. Sight an object at least 15 meters away. Looking with only your left eye, turn the Center Focus Knob until the object sighted is in sharp focus. Looking with only your right eye, turn the Diopter Knob until the object sighted is in sharp focus. 15 USING THE CAMERA Photo modes > > > > > > Turn on power by pressing the Mode/ Power button (4) for three seconds. Press the Mode/Power button (4) to select the desired resolution (High or Low). Press the Shutter/Set button (5) to take a picture. A short beep will sound to indicate that the picture has been taken. The digital counter on the LCD will advance each time a picture is taken. When the built-in camera memory is full, the screen will display , , Full". To delete the last picture, use the Mode/ Power button (4) to select , , Erase last image" (trash-can icon) and press the Shutter/Set button for three seconds. The self-timer function can be selected from the LCD by using the Mode/Power button (4). Press the Shutter/Set button (5) to take an image after 10 seconds. Your DigitalBino is a mass-storage device. [. . . ] Choose the desired language and press the confirm button. After confirming, click the "Next" button. After confirming, click "Yes". The serial number is located on the front of the CD-ROM. [. . . ]