User manual ROLLS EQ210

[. . . ] DESCRIPTION Rear Panel IN: Stereo RCA and 1/8" (3. 5mm) jacks for connection to the stereo input signal OUT: Stereo RCA and 1/8" (3. 5mm) jacks for connection to the stereo output signal Top Panel LVL: Control adjusts the overall level of the equalizer. The center position is detented at unity gain. [. . . ] 12-17 VDC, 150 mA, outside of barrel positive. MONO OPERATION The EQ210 is a Stereo EQ but it can be used for Mono applications. For Mono applications use a single RCA input. Do not use the 1/8" (3. 5mm) jacks for Mono operation. Rolls EQ210 Stereo 10-Band EQ Thank you for purchasing the EQ210 Stereo 10 Band EQ. The EQ210 is a small graphic EQ that enables you to boost or cut the signal at 10 different frequency points. FEATURES · Stereo equalization · 10 frequency controls on standard ISO centers · 12 dB of signal boost or cut for each frequency level control · Overall Level control with 12dB of signal boost or cut · Active Bypass switch in the event of a power loss · Stereo RCA and 1/8" (3. 5mm) Input and Output jacks · 12 VDC power adapter included APPLICATIONS The EQ210 can be used in vitrually any application where tonal change or equalization is needed. With its small footprint and rear mounting screws it can be installed in a tight space, and since it has actual faders still provide easy access to change settings. The EQ210 is perfect for installations, and since it is stereo it's great for use with desktop speakers, mixers and powered speakers, micpreamps, keyboards, computers and more. OPERATION The Graphic Equalizer slider level control boosts or cuts the indicated frequency. Lower numerical values are bass sounds, higher values are treble sounds. The level controls are center detented at unity gain where there is no effect on the frequency. Simply move the level controls up or down to increase or decrease the indicated frequency. [. . . ] If you want to connect the EQ210 within the signal path of a mixer remember to use the "Insert" jack connections, not the "Effects" In and Out connections. EQ210 Stereo 10-Band EQ email: info@rolls. com - web site:www. rolls. com 5968 South 350 West Murry, UT 84107 (801) 263-9053 FAX (802) 263-9068 SPECIFICATIONS Input Impedance: 50 K Ohms Nominal Output Impedance: 100 Ohms Max Input Level: +24 dBV Max Output Level: +14 dB Center Freq: +/-5% Standard ISO Boost/Cut Range: +/- 12 dB Bypass Switch: Active Frequency Response: 20 - 20 kHz +/- 1 dBV Dynamic Range: 95 dB A Weighted S/N Ratio: 85 dB Power: +/- VDC 150 mA (center neg. ) Dimensions: 6. 4 x 3. 7 x 1. 125 inches (WxHxD) Weight 1 lb. WARRANTY This product is warranted to the original consumer purchaser to b e free from defects in materials and workmanship under normal installations, use and service for a period of one (1) year from the date of purcdhase as shown on the purchaser's reciept. Rolls Corporation EQ210 STEREO EQ 6 75889 02100 4 Rolls For complete detailed information regarding Rolls One year Limited Warranty, and to register this product, please vist our website at: www. Rolls. com Users Guide [. . . ]