User manual ROLLS HR72

[. . . ] Click on the REGISTER YOUR WARRANTY HERE line. Or, complete the Warranty Registration Card and return it to the factory. LIMITED WARRANTY This product is warranted to the original consumer purchaser to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser's receipt. The obligation of Rolls Corporation under this warranty shall be limited to repair or replacement (at our option), during the warranty period of any part which proves defective in material or workmanship under normal installation, use and service, provided the product is returned to Rolls Corporation, TRANSPORTATION CHARGES PREPAID. Products returned to us or to an authorized Service Center must be accompanied by a copy of the purchase receipt. [. . . ] · Track Play Status: Indicates the repeating status of the disc. The "Repeat" indicator is on, either "1" or "ALL" will be on. A "1" indicates the current track will be repeated, "ALL" indicates the disc will play repeatedly. "SHUFFLE" play indicates random play, and if no Track Play Status indicators are on, the disc will play through one time and stop. · MP3 Folder Indicator: Displays the number of folders are on the MP3 disc. · Program/Memory Indicators: When "Program" is on, the HR72/RMS272 is in track programming mode. When the "Memory" indicator is on, there are tracks programmed into memory, and the HR72/RMS272 will play those tracks. · Folder Number: Indicates which MP3 disc folder is currently selected. · Track Number: Indicates the current selected track. · Track Time: Indicates, in minutes and seconds, the amount of time the current track has played. 2 DESCRIPTION CONT. REAR PANEL 12 VDC R OPERATION CONT. - Repeat / Shuffle Play When the HR72/RMS272 is first powered up, the Repeat mode is set to ALL. The disc will play through all folders (MP3) and tracks, then repeat continuously. To play one track continuously, press the RPT/SHUF button until the Track Play Status reads REPEAT 1. If the REPEAT status is on alone (MP3 mode) the current folder will repeat. For Shuffle (random) play, press the RPT/SHUF button until the Track Play Status reads SHUFFLE. If the Track Play Status displays none of the above, the disc will play through one time and stop. CD DISC OPERATION · Disc Play If a CD type disc is inserted into the HR72/RMS272, the Disc Type Indicator will read "CD", and the number of tracks will display. · CD Track Progamming Press the PROGRAM button. Press either the FWD or REV to select the track you wish to program. Press RPT/SHUF ENTER to program that track. Repeat this process to program more tracks. [. . . ] PLACE THE DISC INTO THE OPENING AND CAREFULLY PRESS IN UNTIL THE HR72RMS272 DISC LOAD MECHANISM TAKES THE DISC. When a disc is inserted, the display reads "CLOSE", then LOAd", then disc type, folder (if MP3) track and time info. - Playing tracks To to temporarily pause the Play mode, press the PLAY/PAUSE button. To advance to the next track, press the FWD button, to go back to a previous track press the REV button. [. . . ]