User manual ROLLS MX152

[. . . ] SCHEMATIC MX152 MixMate Mic/Line Mixer Input Impedance: Mic: Source: Max Input Level: Mic: Source: Connectors: Phantom Power: Max Gain: Mic: Source: Tone Controls: Noise Floor: S/N Ratio: Priority Attenuation: Power: Size: Weight: SPECIFICATIONS ROLLS CORPORATION SALT LAKE CITY, UTAH 6/04 600 Ohms XLR balanced 22K Ohms RCA -14 dBV Mic level Max 24 dBV 2: XLR, 8: Stereo RCA +12 VDC 60 dBV 26 dBV +/-12 dB 100 Hz Bass +/-12 dB 11kHz Treble - 80 dB 96 dB 60 dB 12VAC / 600 mA 5. 4" x 1. 7" x 5. 5" 2 lbs Owners Manual INTRODUCTION Thank your for your purchase of the Rolls MX152 MixMate. The MX152 is a two microphone, three source stereo mixer designed for restaurants, schools, churches, clubs etc. The unit provides a compact and efficient way to mix sources such as AM/FM tuners, CD players, and video players with dynamic or condenser microphones. [. . . ] If a jukebox is being connected, and you want its signal to mute the other source signals, connect it to Source input 3. Output Connect a stereo RCA cabe to the main Output jack, and to an amplifier or the next device in your signal chain. Shown here is a connection example for the MX152. DESCRIPTION FRONT PANEL Mic 1, 2 Adjust the level of signal from the corresponding Mic Input. 2: TONE 1, 2 Adjusts the frequency content of the microphone signal in the channel. When 2: the control is turned counter-clockwise, the high frequencies are cut, when the control is turned clockwise, the low frequencies are cut. Source 1 - 3: Adjust the volume of input from the RCA Source Inputs. Bass: Adjusts the low frequencies of the Source 1 and 2 signals only. Treble: Adjusts the high frequencies of the Source 1 and 2 signals only. pwr: pwr LED indicating power is applied to the MX152 and the unit is on. OPERATION DIP SWITCH SETTINGS (From left to right) · The Mono/Stereo switch selects the output mode. When the switch is up, the unit is in stereo mode. When the switch is down, the stereo signals are mixed to mono and sent to both the Right and Left Main output jacks. Either jack can be used as a mono output. · Source 3 Priority: when in the down position, Source 1, and 2 will be "ducked" or muted by the signals at Source 3. With a jukebox connected to Source input 3, and the Talkover switch 2 on (down), the other Source input signals such as background music, will be muted and only the jukebox will be heard. [. . . ] SOURCE INPUTS: Stereo RCA jacks, Channels 1 - 3, for connection to stereo sources such as AM/FM tuners, cassette players, cd players, or video players. DIP SWITCH: Contains the small switches for engaging Mic 1, 2 phantom power, Source 3 Stereo or Mono, the priority (Talk Over) functions, and the Mono/Stereo select. MICROPHONE ONE and TWO: Balanced XLR inputs to be connected to dynamic or condenser microphones. [. . . ]