User manual ROLLS RA53B

[. . . ] In the absence of such purchase receipt, the warranty period shall be one (1) year from the date of manufacture. This warranty shall be invalid if the product is damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our own service facility or an authorized Service Center, or any use violative of instructions furnished by us. This one-year warranty is in lieu of all expressed warranties, obligations or liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE ONE YEAR DURATION OF THIS WRITTEN LIMITED WARRANTY. [. . . ] Click on the REGISTER YOUR WARRANTY HERE line. Or, complete the Warranty Registration Card and return it to the factory. TABLE OF CONTENTS Introduction Inspection Table of Contents Description Front Panel Rear Panel Connection Operation Schematic Specifications Warranty SPECIFICATIONS Input Impedance: Max Input Level: Max Gain: Maximum Output Power: Output Impedance: S/N Ratio: THD: IMD (SMPTE): Power: Size: Weight: 10 K ohms +18 dBV 26 dB per channel 300 mW per channel 10 Ohms >90 dB <. 08% <. 08% 12 VAC\DC (Adapter Provided) 8. 4" x 1. 7" x 5" (21. 3 x 4. 3 x 13 cm) 2. 5 lbs (1. 14 kg) 1 1 1 2 2 3 4 5 6 Back Cover 1 6 SCHEMATIC FRONT PANEL DESCRIPTION Note: Descriptions for Channel One through Channel Five are identical. OUTPUT: 1/4" and 1/8" (3. 5mm) Tip-Ring-Sleeve jacks for connection to a standard pair of headphones or earphones. LEVEL: Controls the amount of output signal from the indicated channel. POWER LED: Indicates that the RA53b is connected to the power supply and is on. REAR PANEL POWER: For connection to a Rolls 12 Volt (maximum) power supply. RIGHT/MONO INPUT: 1/4" TS jack for connecting the "Right" side of a stereo signal. If used alone (nothing connected to the LEFT/STEREO jack), a 1/4" TS plug with a mono signal will feed both sides of the RA53b Outputs. LEFT/STEREO INPUT: 1/4" TRS jack for connecting to the "Left" side of a stereo signal. If used alone, (nothing connected to the RIGHT/MONO jack) a 1/4" TRS plug with the "Right" side of the program material on the tip, and the "Left" side on the ring may be connected for stereo operation. For example, a stereo headphone output from a mixing console may be directly connected to the Left/Stereo jack via a stereo TRS cable. L /R INPUTS: RCA input jacks for connection to a signal source such as a CD or cassette player. BALANCED INPUTS: XLR input jacks for connection to a balanced line level source such as the output of a mixer. JOIN: 1/4" TRS jack for connection to another RA53b JOIN jack. Linking two units together provides 10 channels of monitoring from a master stereo signal, with six channels having an insert option. CHANNEL INSERTs: 1/4" TRS jacks for receiving a stereo signal and directly accessing the indicated channel's circuitry. 5 2 CONNECTION Connect the Rolls Power Supply to the POWER jack on the RA53b rear panel. Connect the power supply to an ac outlet. Determine which input configuration you will use; either discreet right/left, TRS stereo, or mono. For a discreet right/left input configuration, connect a 1/4" TS plug containing the "Right" portion of the stereo signal to the Right/Mono Input. [. . . ] A 1/4" Tip-Ring-Sleeve cable connects on RA53b JOIN jack to another RA53b JOIN jack for ten channels of headphone/earphone monitoring. For connection to another RA53b The RCA Aux Inputs are connected in the same manner as the discreet right/left input configuration listed above. To link another RA53b, simply connect a 1/4" TRS stereo cable to both JOIN jacks on two RA53b units. INSERTS The Channel 1, 2 and 3 inserts have been provided so you can directly access Channel 1, Channel 2 and Channel 3 headphone and earphone outputs with their own program material. The inserts require Tip-Ring-Sleeve connectors, with right and left signals on the tip and ring respectively. [. . . ]