User manual ROLLS RM64

[. . . ] In the absence of such purchase receipt, the warranty period shall be one (1) year from the date of manufacture. This warranty shall be invalid if the product is damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our own service facility or an authorized Service Center, or any use violative of instructions furnished by us. This one-year warranty is in lieu of all expressed warranties, obligations or liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE ONE YEAR DURATION OF THIS WRITTEN LIMITED WARRANTY. [. . . ] We suggest saving the shipping carton and packing materials for safely transporting the unit in the future. Please visit our website at www. rolls. com for Warranty Registration, or complete the Warranty Registration Card and return it to the factory. TABLE OF CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCHEMATIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPECIFICATIONS Input Impedance: Output Impedance: Max Input Level: Phantom Power: Input Connectors: Outputs: Max Gain: S/N Ratio: THD IMD (SMPTE) CMRR Frequency Response: Power Weight: Size: 10K 9balanced 50K 9 unbalanced RCA 50 9 Balanced XLR Mic: +10 dB Source: +22 dB +12 Volts DC, 5mA max. XLR 60 dB mic 30 dB line >75 dB < . 3% < . 3% 90 dB 20Hz to 20kHz +/- 0 dB 120 VAC 50-60 Hz, 15 W 7 lbs (3KG) 19" x 1. 75" x 6. 5" (48cm x 4. 5cm x 17cm) 1 1 1 1 2 3 4 5 6 BACK COVER 1 6 SCHEMATIC FRONT PANEL ZONE SELECT 12345678 DESCRIPTION ZONE SELECT 12345678 ZONE SELECT 12345678 FOUR ZONE MIXER LEVEL LEVEL LEVEL LEVEL LEVEL LEVEL 12341234 LEVEL LEVEL 12341234 LEVEL LEVEL 12341234 pwr RM64 MIC INPUTS 1, 2: These LEVEL controls adjust the volume of the indicated Microphone channel. SOURCE INPUTS 1 - 4: These LEVEL controls adjust the volume of the indicated Source channel. ZONE SELECT: DIP switches for assigning the indicated Mic or Source channel to the Zone Outputs. The four switches closest to the channel LEVEL control assign that channel to the zones. ZONE OUTPUTS: These LEVEL controls adjust the output volume of the indicated ZONE. pwr LED: When lit, indicates the RM64 is on. Power switch: Turns the RM64 on and off. REAR PANEL MODEL RM64 MADE IN USA SERIAL NUMBER 64- OUTPUT 4 REMOTE VOLUME OUTPUT 3 REMOTE VOLUME OUTPUT 2 REMOTE VOLUME OUTPUT 1 4 3 2 1 ZONE PHANTOM DUCK POWER ASSIGN 432121 123456 INPUT 2 INPUT 1 REMOTE VOLUME WARNING: 120 VAC TO RAIN OR MOISTURE NO USER SERVICABLE PARTS INSIDE. [. . . ] The zone is assigned when the switch is in the DOWN position. For example, the switch settings above send Mic 1 to all four Zones; 1, 2, 3, and 4. Source 1 is sent to Zone 1 and Source 2 is sent to Zones 2, 3, and 4. The first four rear panel DIP switches assign which zone has priority paging, or ducking, when a signal is present at the microphones. [. . . ]