Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ROLLS RM74. We hope that this ROLLS RM74 user guide will be useful to you.
Lastmanuals help download the user guide ROLLS RM74.
You may also download the following manuals related to this product:
ROLLS RM74 DATASHEET (544 ko)
Manual abstract: user guide ROLLS RM74
Detailed instructions for use are in the User's Guide.
[. . . ] Connect the Tip connection to your effects processor's Input jack, and the Ring connection to the Output of the effects processor. The RM75 effects insert is mono, so if the effects processor is stereo - choose a Mono output. You may need to refer to your effects processor owners manual for more information about operating it in mono. [. . . ] Connect the power supply to an AC outlet (preferrably a power strip with master switch). If the unit is to be used in a permanent install, connect all sources and microphones to the desired channels on the rear panel. Remember which signal sources are connected to which Source Inputs. For use in mobile DJ/Karaoke rigs, the microphone should be connected to the front panel Microphone Input so it may be easily removed when the mobile rig is packed. Shown below is a possible connection example for the RM74.
CONNECTION
DESCRIPTION FRONT PANEL
INPUT: Balanced XLR jack for connection to a dynamic or condenser microphone. This jack parallels the Channel 1 Microphone Input on the rear panel. NOTE: The following two descriptions are for Mic 1 and Mic 2. LEVEL: Adjusts the amount of signal from the Microphone Input channel to the Main Outputs. TONE: Adjusts the relative frequency components of the Mic signal. Turning this control clockwise from the center (detented) position decreases the low frequencies. Turning the control counter-clockwise from center decreases the high frequencies. SOURCE LEVEL CONTROLS 1 - 4: Adjust the amount of signal from the indicated Source channel to the Main Outputs. IN 4: 1/8" (3. 5 mm) Source Input jack. This jack parallels the Source 4 Input on the rear panel. BASS: Varies the amount of the low frequency portion (150 Hz) of the Source signals. TREBLE: Varies the amount of the high frequency portion (10 kHz) of the Source signals. CUE SELECT: Selects a Source signal, or the Main Output signal to be sent to the Headphone Output. HEADPHONE LEVEL: Adjusts the amount of signal to the Headphone Output. [. . . ] There will be nothing heard from the Main Outputs until you increase the level of a Source or Mic channel. You may now "cue" or prepare the Source selection for playing. Set the Headphone Level for a comfortable amount. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLLS RM74
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLLS RM74 will begin.
ROLLS RM74 DATASHEET (544 ko)
