User manual ROSE DISPLAYS ANOFRAME ROUND NO LOAD WITH WALL HANGERS

[. . . ] AnoFrameTM Round Profile Instruction Sheet Parts Corner Brackets AnoFrame Rails 12AF-100 Wall Mounting Hangers 06-6067 Instructions For Assembly Step 1 Insert corner brackets into vertical AnoFrame side rails. [. . . ] Fig 6 Note: The AnoFrame shown here is a round profile. It is available in either round or square profile. The AnoFrame is a trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSANFRNoLoadHanger 35 Congress Street, Salem MA 01970 Tel# 1-800-631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Figure 5 Figure 6 Incept-8. 15. 02 AnoFrameTM Round Profile Instruction Sheet Parts Corner Brackets AnoFrame Rails 12AF-100 Wall Mounting Hangers 06-6067 Instructions For Assembly Step 1 Insert corner brackets into vertical AnoFrame side rails. 1 Note: Assembly brackets tension tabs face towards outside of frames. top horizontal rail w/MultiClips Step 2 Push top and bottom horizontal Ano rails onto one side rail as shown in Fig. 2 horizontal rail Figure 1 Figure 2 Step 3 Insert poster through side opening. Fig 3 side rail Step 4 Push final side rail into place as shown in Fig 4. Step 5 Install wall mounting hangers using a Phillips head screwdriver. A plastic expansion anchor is suggested for drywall installations. [. . . ] Part #02INSANFRNoLoadHanger Figure 5 Figure 6 Incept-8. 15. 02 [. . . ]