User manual ROSE DISPLAYS ANOFRAME ROUND WITH WINDOW MOUNTS

[. . . ] AnoFrameTM Instruction Sheet Parts Corner brackets AnoFrame rails 12AF-100 AnoFrame split rails Window Mounts 20-0038 Instructions for Hanging Step 1 Locate the two split rails and the solid rail that is the same length as the split rails. [. . . ] 4. split rails Step 4 Insert poster. Fig 5 Note: For best performance when first applied and occasionally thereafter, press the middle of the cup (on the cap) to "burp" extra air out. Figure 4 Figure 5 The AnoFrameTM is a trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSAnoFrameWindowMounts 35 Congress Street, Salem, MA 01970 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Incept-8. 15. 02 AnoFrameTM Instruction Sheet Parts Corner brackets AnoFrame rails 12AF-100 AnoFrame split rails Window Mounts 20-0038 Instructions for Hanging Step 1 Locate the two split rails and the solid rail that is the same length as the split rails. Insert corner brackets into side AnoFrame rails. Insert two corner brackets into each end of the solid side Ano rail. Insert one corner bracket into each end of each split side Ano rail. 2 Note: Tension tabs on corner brackets face towards outside of frame. solid rail Figure 1 Figure 2 split rails Step 2 Slide the Wally Window Mounts into the top rail of the AnoFrame rail. [. . . ] Part #02INSAnoFrameWindowMounts Incept-8. 15. 02 [. . . ]