User manual ROSE DISPLAYS ANOFRAME SQUARE WITH CABLE AND SAUCER

[. . . ] AnoFrameTM Parts Square Profile Instruction Sheet Corner Brackets AnoFrame Rails 12AF-100 AnoFrame Split Rails Cable and Saucer 16-0018SS Instructions For assembly solid rail Step 1 Locate the two split rails and the solid rail that is the same length as the split rails. Insert corner brackets into side AnoFrame rails. [. . . ] 5 sliding sides together in the order shown. split rails Step 4 Insert poster. Note: The AnoFrame shown here is a square profile. It is available in either square or round profile. solid rail Figure 5 Figure 6 The AnoFrame is a trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INANFSQCableandSaucer 35 Congress Street, Salem MA 01970 Tel# 1-800-631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Incept-8. 23. 02 AnoFrameTM Parts Square Profile Instruction Sheet Corner Brackets AnoFrame Rails 12AF-100 AnoFrame Split Rails Cable and Saucer 16-0018SS Instructions For assembly solid rail Step 1 Locate the two split rails and the solid rail that is the same length as the split rails. Insert corner brackets into side AnoFrame rails. Insert two corner brackets into each end of the solid side Ano rail. Insert one corner bracket into each end of each split side Ano rail. 2 Note: Tension tabs on corner brackets face towards outside of frame. split rails Figure 1 Figure 2 Step 2 Insert saucer into end of top Ano rail. Note: It is easier to slide the saucer in the Ano rail if you hold the cable as close to the saucer as possible. [. . . ] Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INANFSQCableandSaucer Incept-8. 23. 02 [. . . ]