User manual ROSE DISPLAYS ANOFRAME SQUARE WITH NO LOAD WITH MULTICLIPS

[. . . ] AnoFrameTM Square Profile Instruction Sheet Parts Corner Brackets AnoFrame Rails 12AF-100 MultiClips 1UP-0100 Instructions For Assembly Step 1 Insert corner brackets into vertical AnoFrame side rails. [. . . ] Note: The AnoFrame shown here is a square profile. It is available in either round or square profile. side rail Figure 5 The AnoFrame is a trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSANFRNoLoadSQ 35 Congress Street, Salem MA 01970 Tel# 1-800-631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Incept-8. 15. 02 AnoFrameTM Square Profile Instruction Sheet Parts Corner Brackets AnoFrame Rails 12AF-100 MultiClips 1UP-0100 Instructions For Assembly Step 1 Insert corner brackets into vertical AnoFrame side rails. 1 & Fig. 2 Note: Assembly brackets tension tabs face towards outside of frames. Step 2 Install MultiClip(s) in top frame rail. Holding clip at slight angle, first insert one round end, then press down on other round end and push MultiClip into rail. Fig 2 Figure 1 top horizontal rail w/MultiClip(s) Figure 2 Step 3 Push top and bottom horizonral Ano rails onto one side rail as shown in Fig. 3. horizontal rail Figure 3 Figure 4 Step 4 Insert poster through side opening. [. . . ] Part #02INSANFRNoLoadSQ Incept-8. 15. 02 [. . . ]