User manual ROSE DISPLAYS ANOFRAME WITH TOP AND BOTTOM WALL MOUNTS

[. . . ] AnoFrameTM Parts Instruction Sheet 2 2 8 3 2 Corner Brackets AnoFrame Rails 12AF-100 AnoFrame Split Rails Wall Mounting Hangers 06-6067 Bottom Wall Hangers 06-6069 Instructions For Hanging solid rail Step 1 Locate the two split rails and the solid rail that is the same length as the split rails. Insert corner brackets into side AnoFrame rails. [. . . ] Fig 5 Step 5 split rails Figure 1 solid rail Figure 2 split rails solid rail Figure 3 Figure 4 Install 2 bottom wall hangers. Fig 7 Note: The AnoFrame shown here is a round profile. It is available in either square or round profile. Assembly is the same for top and side load. Figure 5 Figure 6 Figure 7 The AnoFrame is a trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSAnoFrame4Hangers Incept-2. 11. 04 35 Congress Street, Salem MA 01970 Tel# 1-800-631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com AnoFrameTM Parts Instruction Sheet 2 8 3 2 2 Corner Brackets AnoFrame Rails 12AF-100 AnoFrame Split Rails Wall Mounting Hangers 06-6067 Bottom Wall Hangers 06-6069 Instructions For Hanging solid rail Step 1 Locate the two split rails and the solid rail that is the same length as the split rails. Insert corner brackets into side AnoFrame rails. Insert two corner brackets into each end of the solid side Ano rail. Insert one corner bracket into each end of each split side Ano rail. 2 Note: Tension tabs on corner brackets face towards outside of frame. Step 2 Finish assembling frame by following sequence in Fig. Step 3 Install 2 wall mounting hangers using a Phillips head screwdriver. [. . . ] Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSAnoFrame4Hangers Incept-2. 11. 04 [. . . ]