User manual ROSE DISPLAYS ANOQUICK SQUARE WITH GOTCHA AND MULTICLIPS

[. . . ] AnoQuickTM with Gotcha® Insert Instruction Sheet Parts AnoQuick Square Profile 12A300SQ Gotcha® Special (no clip rail) MultiClip 1UP-0100 Square End Cap 06-5545 Instructions for Hanging Step 1 Place poster on a flat surface. Snap the Gotcha Holder open and insert poster (top and bottom). 1 Note: It is easier to open and close the Gotcha Holder by starting at one end and working your way down the holder. Step 2 Slide the Gotcha Holder into the AnoQuick Holder. [. . . ] 2 Step 3 Install the MultiClips in top AnoQuick Holder. Holding clip at slight angle, first insert one round end, then press down on the other round end and push MultiClip into holder. 3 & 4 Figure 3 Step 4 Push end caps into place. 5 Note: To remove Gotcha (and sign), simply rotate end cap up out of the way. Step 5 Suspend poster. Important note: Please save and reuse the AnoQuick, Gotcha Holder, End Caps and MultiClips for future projects. Figure 4 Figure 5 The AnoQuickTM is a trademark and Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSAnoQuickSQGotchaMC Incept-9. 9. 02 AnoQuickTM with Gotcha® Insert OneUp Instruction Sheet Parts AnoQuick Square Profile 12A300SQ Gotcha® Special (no clip rail) MultiClip 1UP-0100 Square End Caps 06-5545 Instructions for Hanging Step 1 Place poster on a flat surface. Snap the Gotcha Holder open and insert poster (top and bottom). 1 Note: It is easier to open and close the Gotcha Holder by starting at one end and working your way down the holder. Step 2 Slide the Gotcha Holder into the AnoQuick Holder. 2 Figure 1 Figure 2 Step 3 Install MultiClip in top AnoQuick holder. Holding clip at slight angle, first insert one round end, then press down on other round end and push MultiClip into holder. 3 Note: For OneUp applications place the MultiClip in the center of the AnoQuick Holder. 4 Figure 3 Step 4 Push end caps into place. 5 Note: To remove Gotcha (and sign), simply rotate end cap up out of the way. Step 5 Suspend poster. Figure 4 Important note: Please save and reuse the AnoQuick Holder, Gotcha Holder, End Caps and MultiClips for future projects. The AnoQuickTM is a trademark and Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. [. . . ] 5 Note: To remove Gotcha (and sign), simply rotate end cap up out of the way. Step 5 Suspend poster. Figure 4 Figure 5 Important note: Please save and reuse the AnoQuick Holder, Gotcha Holder, End Caps and MultiClips for future projects. The AnoQuickTM is a trademark and Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSAnoQuickSQGotchaMC Incept-9. 9. 02 [. . . ]