User manual ROSE DISPLAYS SPIDER RING

[. . . ] Spider RingTM Parts Instruction Sheet Spider Ring 16-0018R Instructions for assembly Important note: Spider Rings can be attached before or after suspending sign. If the rings need to be positioned out of reach, or if more than two cable wraps are required per ring, wrap the cable around the rings before sign is hung. Step 1 Place Spider Ring onto the cable. [. . . ] Maximum of 6 wraps or 18" per Spider Ring. Multiple rings can be used on each cable for more adjustability. Figure 3 Figure 4 Step 4 Repeat steps 1-3 for each cable used to hang your sign. Step 5 Slide the Spider Rings up and out of view. Note: To lengthen cable, unwind one or more wraps from each Spider Ring. The Spider RingTM is a trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSSpiderRing 35 Congress Street, Salem, MA 01970 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Figure 5 Incept-2. 5. 02 Spider RingTM Parts Instruction Sheet Spider Ring 16-0018R Instructions for assembly Important note: Spider Rings can be attached before or after suspending sign. If the rings need to be positioned out of reach, or if more than two cable wraps are required per ring, wrap the cable around the rings before sign is hung. Step 1 Place Spider Ring onto the cable. The cable goes inside the ring's outer groove. 1 Figure 1 Figure 2 Step 2 With the cable inside the groove, wrap it once around the ring. 2 Step 3 While holding the ring, pull down on cable until it pops into the groove. 3 Repeat steps 1-3 for multiple wrappings. [. . . ] Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #02INSSpiderRing 35 Congress Street, Salem, MA 01970 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com Figure 5 Incept-2. 5. 02 [. . . ]