User manual ROSEN CAR SHOW 15.4 REV A

[. . . ] The bracket is directional! Please use screws in the holes indicated to mount the bracket to the vehicle. NEVER USE SCREWS THAT COULD DAMAGE THE VEHICLE ROOF IN ANY WAY! Front of vehicle Screws Screws Screws Screws Rear of vehicle 4 Step 2: Make sure that the headliner allows the monitor mounting screws to travel from the monitor to the bracket. Front Rear Screw hole 4 mm Screw hole 4 mm 5 Step 2 continued: Car roof Mounting bracket Direction of mounting screws 6 Step 3: Mount the monitor to the bracket using the supplied screws. NEVER use any screws except those provided with the unit! [. . . ] V1/V2Pressing this key, switches between Video Inputs 1 and 2. MENUWhen you press this key, a menu will appear. Use the + and ­ keys to highlight menu selections. When the desired selection is highlighted, press the MENU/SELECT button again to change to that selection. UPWhen you push this button, you will move up in a menu, or increase the value of the setting you have selected. 9 DOWNWhen you push this button, you will move down in a menu, or decrease the value of the setting you have selected. 4. On-Screen Displays (OSDs) OSD MENU LIST BRIGHTNESS : Adjust the Brightness of Screen. Adjustment Area0 ~ 15 BRIGHTNESS VIDEO 1 15 CONTRAST : Adjust the Contrast of Screen Adjustment Area: 0 ~ 31 CONTRAST VIDEO 1 21 SHARPNESS : Adjust the Sharpness of Screen Adjustment Area: 0 ~15 SHARPNE VIDEO 1 7 HUE: Adjust the Hue of the screen Adjustment Area: 0 ~ 62 HUE VIDEO 1 21 SATURATION: Adjust the Saturation of picture Adjustment Area: 0 ~ 62 VIDEO 1 SATURATION 31 10 MUTE ON : Turn Mute function on and off. VIDEO 1 MUTE ON DISPLAY MODE: Adjust the display mode to 16:9 (widescreen) , 4:3 (standard television), or 16:9 FULL (pan-and-scan). VIDEO 1 DISPLAY MODE 16:9 DEFAULT : Return to the original Setting of LCD. VIDEO 1 DEFAULT (VX. XX) SAVE AND EXIT : Save your Personal Setting and exit to Menu Mode. VIDEO 1 SAVE AND EXIT 11 5. Description of harnesses and wiring Accessories Description Power input harness: Yellow: ACC 12V(+) switched IMPORTANT!DO NOT CONNECT YELLOW TO CONSTANT 12V(+)!Black: Chassis GND A/V Output harness: Yellowvideo output Redaudio output(R) 1. 2 Whiteaudio output(L) Note: This harness is optional and not used in some installations. A/V Input harness: Note: See wire labels for Input 1 and 2 identification. Yellowvideo input 1 & 2 3 RedR Channel audio input 1 & 2 WhiteL Channel audio input 1 & 2 Wireless headphone receiving 2. 3MHz/2. 8MHz HEADPHONE NOT INCLUDED!12 Optional infrared wireless headphones 4 (not included) 7. Do not apply pressure to the LCD screen. [. . . ] THE SUPPLIER DISCLAIMS ANY LIABILITY FOR ANY BODILY INJURY OR PROPERTY DAMAGE THAT MAY RESULT FROM ANY IMPROPER OR UNINTENDED INSTALLATION AND/OR USE. WHEN YOU DO THE INSTALLATION: 1. Please connect the power to ACC, instead of IGN or BAT. If you connect the power to IGN, the monitor might shut down when you start the engine. [. . . ]