User manual ROSEN CLEARVUE REV A

[. . . ] Extended viewing of the system without the engine running should be avoided, as it could drain the battery. Lowering the Screen Press the Release button located here. Adjustment Knob The screen will lower itself into the viewing position. To change the viewing position, insert two fingers into the adjustment knob's finger indentations, and rotate as needed. Page 4 Using the System Functional Remote Buttons NOTE: Some buttons control functions only on other Rosen products. Power Mode VCP Aux Speaker On/Off Video Menu Eject Mute Exit Previous Track Next Track Play/Pause Slow Rewind Fast Forward Stop Page 5 Using the System Using the VCR Tape Door Line 2 inputs Power button Stop Eject Record Indicator Lights for Power, Recording, Rewind SLP, and Heat/Dew Modes; IR Remote eye Play Fast Forward In order to watch a video tape, insert the tape into the VCR. [. . . ] Broadcast television reception varies with location, terrain, distance from the broadcast tower, and other obstructions. Please remember that in a moving vehicle, signal quality may fluctuate - this is to be expected. NOTE: The TV button on the remote is not active on the ClearVue 6. 8 system. Pressing this button will have no effect on system functions - use the MODE button. NOTE: When the VCR's protection mode is active, the TV Tuner function is not available. For more information, see "Using the VCR" on the previous page. Page 7 Using the System Using the Auxiliary Inputs The ClearVue system has two auxiliary audio/video inputs. These allow the connection of external devices such as a videogame or camcorder. These inputs are standard "RCA" connectors. The first set is on the rear of the VCR, and the second set is on the face of the VCR. The red jack is for right-channel audio, the white jack is for left-channel audio, and the yellow jack is for video. Before attempting to use an auxilary source unit, make sure that you obtain the proper cable to connect it to the ClearVue system. To play an auxilary source connected to the front-panel jacks, press and release the MODE button until "LINE 2" is displayed on the screen. To play an auxilary source connected to the rear-panel jacks, press and release the MODE button until "LINE 1" is displayed on the screen. NOTE: When using a video game in the vehicle, a 12VDC/ 110VAC power inverter is required. Ask your Rosen dealer for details. Changing the Video Settings The ClearVue system has adjustable settings for Color, Contrast, Brightness, and Tint. To change these settings, press the VIDEO MENU button on the remote. The menu will be displayed on the screen until you press VIDEO MENU again. ***MENU*** >COLOR (35) CONTRAST (35) BRIGHT TINT (35) (35) To select the setting to be changed: Move the cursor up and down the menu list using the up and down arrow keys on the remote. [. . . ] Turn down the headphone volume using the rotary control on the side. Power LED Right earpiece On/off switch Rotary tuning control Rotary volume control WIthout putting the headphones on your head, rotate the tuning control until faint sound is audible from the headphones. Lower the volume with the volume control until the headphones cannot be heard. Put the headphones on your head and slowly adjust the volume to a comfortable level. Page 10 Battery Replacement Replacing the Headphone Batteries There is a sliding cover on the right side of the headphone which conceals the batteries. The headphones use two AAA batteries. Step 1 - Press on the cover release tab here. Step 2 - Grasp the cover by its sides and pull up. Step 3 - Remove the batteries and insert the new replacements, noting to insert them correctly. Replacing Remote Control Batteries To access the batteries, place your thumb on the arrowshaped raised lines on the rear of the remote, and press in the direction indicated. [. . . ]