User manual ROSEN NECVOX 8.0

[. . . ] 1. 2 Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 3 Signal Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 4 Typical Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FUNCTION KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 2 3 4 4 5 6 7 8 8 9 9 10 10 10 10 10 10 11 11 11 12 12 12 13 13 13 14 14 14 3. [. . . ] Disconnect the ground wire from the battery terminal prior to connecting the unit to the electrical system. The wiring from some other products or accessories might bear similar color code as this product; however, they might be of other function. Please refer to the electrical connection diagrams of this product prior to installing to avoid improper connection. Use proper installation and fastening materials to prevent electrical damage to the unit. Do not connect the yellow wire and red wire together of this product directly to the +12V. Connect the red wire of this product to the ACC of the ignition key switch and yellow wire to +12V. Failure to do so may result in permanent drainage of the battery charge. Only supplied accessories should be used to avoid damage to the unit during installation. Ensure that the display monitor is suitably installed at a location, such that it will not obstruct the rear view mirror and/or the air condition vents. Do not install this unit at a declining angle exceeding 30 degrees. Do not install screws over the plane surface, which may affect monitor eject or retract function. IMPORTANT NOTES: * When the unit is used in conjunction with a Radio/TV tuner, please assure that the receiver is manufactured to receive television broadcast signals that are transmitted via terrestrial radio waves. Use a small coin to open the battery clip. Remove old battery and replace it with the positive "+" sign facing upward. Push battery clip into compartment until it is locked. Do not misuse battery by shorting the positive "+" and negative "-" terminal or put it into fire. Overheating may cause the battery to explode and cause a fire hazard. Remove the used battery from the compartment to prevent leakage. To avoid accidents, prevent children from playing with the battery. 4. 2 Unloading Disc: 1. Remove the disc from the desk. (Avoid touching the recorded surface) 3. Push to close the case, until you hear a click sound from the mechanism. 8 9 5. OPERATING THE MONITOR: 5. 1 OPEN/CLOSE THE DISPLAY MONITOR To open/close the display monitor, push & pull the "OPEN" button to the desired position. 5. 2 POWER ON THE DISPLAY MONITOR To keep the LCD display back into the enclosure, pull the monitor back to the tray monitor lock with a click. [. . . ] (1) During DVD playback, press the "TITLE" button. (2) Use / / / to select the preferred item. (3) Press "ENTER" button, the selected title will start playing. 6. 7. 7 Display function (DVD/MP3/CD) During DVD playback, press the AUDIO button. "AUDIO x/y" will appear, x represents the current audio stream and y represents the total available audio streams. [. . . ]