User manual ROSEN UN7200

[. . . ] Do not operate the monitor at temperatures below 32°F (0°C) or above 140°F (60°C). 9100768 Installation Guide: The kit includes a protective trim ring and an optional spacer ring for use when the mounting surface is uneven. Select appropriate locations in your vehicle for the monitor . Be sure there is sufficient depth for the trim ring. [. . . ] DOWN : Positive and Negative Adjustment B Off A IR-A(L-2. 3MHZ, R-2. 8MHZ) IR-B(L-3. 2MHZ, R-3. 8MHZ) 03 REMOTE CONTROL: 1 2 3 4 5 6 7 8 9 RES 10 SOURCE NEXT DISC 11 CH 20 INFO EJECT 12 13 ENTER 14 SUB TITLE 15 SOURCE MENU 16 CH DISC MENU DISC ZOOM 17 18 OUTPUT B 19 DISPLAY MODE ROSEN USING THE REMOTE CONTROL You can use the remote control to operate the system, including access to features not available on the front panel. For definitions of each remote control button's specific function, see the following pages. 1 2 3 4 5 6 7 8 9 10 11 Power On/Off (TV-TUNER / DVD Changer / Single disk DVD ) Stop ( Ext DVD ) 12 Navigate left Play / Pause ( Ext DVD ) 13 Enter Previous Chapter/Track ( Ext DVD ) 14 Navigate Right Reverse ( Ext DVD ) 15 Source Setup Menu- Auto Tune Fast forward ( Ext DVD ) (TV Tuner only) Next Chapter/Track ( Ext DVD ) 16 Navigate Down Mute (On / Off) 17 Dimmer (Day/Night Mode) Next Disc ( Ext DVD ) 18 Output B Control (Tuner only) Source select 19 Display Mode Navigate Up 20 INFO ( Ext DVD ) Note: If you try to perform a DVD action when it is not permitted (such as accessing the disc menu while the disc is loading), there will be no response from the unit. This is normal operation and is not a problem with your system. 04 BASIC REMOTE CONTROL BUTTONS: 1 TV-Tuner / DVD Changer (POWER) Pressing this POWER ( ) button will turn the unit on. If unit off, a single press should turn the unit on. Otherwise once the unit is on, a single press should change source. 2 Stop Press once to temporarily stop playback of a DVD. To resume normal playback from the same point, press PLAY. To play the disc from the beginning, press STOP twice, then PLAY. 3 Play/Pause Press to begin or resume playback of a DVD. Press repeatedly to advance video frame by frame. Note: When the disc is first inserted, you may have to press PLAY or ENTER to begin playback. 4 Previous Chapter/Track Press to jump to the previous title or chapter, if available on a DVD, or to the previous track on an audio CD. 5 Reverse Press to search in reverse. To resume normal playback, press PLAY. 05 BASIC REMOTE CONTROL BUTTONS: 6 Forward/Search Press during playback to fast forward. Press the RIGHT and LEFT arrow buttons to adjust search direction and speed. 7 Next Chapter/Track Press to jump to the next title or chapter, if available on a DVD, or to the next track on an audio CD. 8 Mute Press once to mute all system audio. As long as the Mute function is active, "Mute" will appear on the screen. Press again to turn Mute off. 9 Next Disc NEXT DISC When the optional R5006 DVD Changer is connected, this button commands the changer to play the next disc in the magazine. 10 Source SOURCE This button lets you select the internal DVD/CD player, the Internal Game, or the Auxiliary input. You can also select the optional TV Tuner, DVD Changer, or other optional auxiliary sources, if installed. 11, 16 Navigate Up/Down Arrows Press to move up or down in a menu or to change channel when watching TV. 06 BASIC REMOTE CONTROL BUTTONS: 12, 14 Left/Right Arrows Press to move left or right in a menu. 13 Enter ENTER Press to make a menu selection. 15 Source Menu SOURCE MENU If the source unit selected has a Setup Menu, you can access it by pressing Source Menu. [. . . ] Before you install the monitor, consider the following important notices: 1. NEVER install this monitor where it can be viewed from the driving position; this is a violation of many state and local vehicle codes. Avoid mounting locations where there is a risk of impact with a passenger in the event of an accident. Always mount the monitor securely using the mounting hardware that is provided. [. . . ]