User manual ROSIERES DGF 020

[. . . ] Ask your local retailer for the complete catalogue of Rosieres products. Please read this booklet carefully as it provides important guide lines for safe installation, use and maintenance and some useful advise for best results when using your washing machine. Keep this booklet in a safe place for further consultation. When contacting Rosieres or a Customer Services Centre always refer to the Model, No. [. . . ] And the residual dampness required, according to the load and drying type selected. After pressing the START button, one of the indicators will light to display the drying time remaining. " " = Extra dry drying programme (recommended for towels, bathrobes and bulky loads) " " = Cupboard dry drying programme " " = Iron dry drying programme IMPORTANT!During the drying cycle: Drying programme can be cancelled by rotating the drying time selector to the zero position. ( ): in this case caution must be paid because the machine and clothes load may be very hot cause the cool down phase is not carry out. For a correct operation it is preferable carry out the cool down phase turning the knob in clockwise direction to the position ( ) Drying programme cannot be changed: even if the selector is set to another programme , the machine ignores this new setting and continues to complete the original drying programme. 120 minutes with a cool down final phase of 10 minutes. If the drying time is selected before or during the wash cycle the machine will automatically commence the drying programme. If a programme has been selected which does not enable the automatic drying phase (e. Delicate and Woollens programmes or a drain programme), at the end of the wash cycle the light STOP will go on and will not carry out the drying cycle. nOTE: THE DRYING TIME SELECTOR KNOB MUST BE RETURN TO THE OFF POSITION ( ) AT THE END OF EACH DRYING CYCLE. AA SPECIAL PROGRAMME AT 40°C This special programme has been studied to allow you to obtain the best washing performance, even at full load, as the 60°C Cotton programme (the normative cycle), but with the advantage of an energy saving due to 40°C temperature, instead of 60°C. MIXED AND SYNTHETIC FABRICS The main wash and the rinse gives best results thanks to the rotation rhythms of the drum and to the water levels. A gentle spin will mean that the fabrics become less creased. SPECIAL DELICATE FIBRES This is a new wash cycle which alternates washing and soaking and is particularly recommended for very delicate fabrics. The wash cycle and rinses are carried out with high water levels to ensure best results. The programme has a maximum temperature of 40° and concludes with 3 rinses and a short spin. This programme allows a complete washing cycle for garments specified as "Hand Wash only" on the fabric care label. The programme has a temperature of 30°C and concludes with 3 rinses and a slow spin. EN "A" WASH 59 ' This specially designed programme maintains the high quality wash performance identified with the "A" rating whilst greatly reducing the wash time. The progrramme is designed for a maximum load of 3 kg with a temperature of 60°C and concludes with 2 rinses and a high speed spin sequence. This programme allows a complete washing cycle for laundry items made from Silk on the fabric label. [. . . ] The programme carries out with the programme selector stationary on the selected programme till cycle ends. The washer-dryer will then complete the entire drying programme. at the end of the programme the indicator light "Stop" will go on. Wait for the door lock to be released (about 2 minutes after the programme has finished). [. . . ]