User manual ROSIERES LV 222

[. . . ] It is effective within 3 seconds and is suitable for steady, homogeneous and also sustained cooking. The temperature rise of this surface unit is extremely rapid. It is suitable for frying meat, rapid boiling and intensive cooking where a high-temperature is required for a very short period of time. ______________________________________________________________________ SURFACE COOKWARE TIPS ____________________________________________________________________________ Using good quality cookware is critical to get the best performance from your hob. [. . . ] To switch on the surface unit with extension, turn the knob right, pass over the setting 12, force the spring till the stop, then come back on the requested setting. By setting the knob on "0", the surface unit will totally stop. positions : The examples below are intended as guidelines. When you become familiar with using your hob you will be able to work out settings to suit yourself. Very slow To keep a dish hot, melt butter and chocolate . Slow Moderate Medium High Very high Slow cooking, bechamel, stews, rice in milk, poached eggs . dry beans , frozen foods , fruit , boiling water . Steamed apples, fresh vegetables, pasta, crepes, fish . More intense slow cooking, omelettes, steaks . MAINTENANCE OF GLASS CERAMIC HOBS ____________________________________________________________________________ Before carrying out any maintenance work on the hob, let it cool down. Rub any stubborn stains with a soft cloth or with slightly damp kitchen paper. Incorrect cleaning materials have been used, spillage or grease stains remain on the surface. Areas of discoloration on cook- Marks from aluminium and copper pans as well as mineral deposits from water or food can be removed top. The hob is out of order, or some The shunt bars are not properly fitted on the tersurface units do not work. Check the connection is made in conformity with the instructions page 24 - 25. ____________________________________________________________________________ INSTALLATION - BUILT-IN ___________________________________________________________________________ The cabinet in which your hob will be installed and all adjacent furniture, should be made of materials which can withstand high temperatures. In addition, all decorative lami-nates should be fixed using the heat-resistant glue. Take care to keep a minimum 5 cm between the appliance and adjacent furniture. To ensure proper ventilation around the hob, allow at least 1 cm between the underside of the hob and the cabinet, and a 10 x 10 cm opening as illustrated. When placing the hob, make sure that the joint (fitted with the hob) between the surrounding edge of the appliance and the worktop is properly sealed and that spillages cannot leak into any gap. ____________________________________________________________________________________ INSTALLATION - ELECTRICAL CONNECTION _______________________________________________________________________________ "The installation must be in conformity with standard directives". Rosières declines all responsabiity for any damage that may be caused by unsuitable or unreasonable use. [. . . ] The earth thread must be clipped at this place. When you fit the cover back, do not forget the fan-lock washers. To shunt : make a bridge with a shunt bar. ___________________________________________________________________________ GUARANTEE __________________________________________________________________________________ The guarantee contract consists simply and solely in exchanging or replacing any part considered by us to be defective, or repairing it after examination by our Technical Assistance, to the exclusion of all other indemnities of whatever kind. [. . . ]