User manual ROSIERES RBI647

[. . . ] Warning: this appliance complies with current safety regulations and electromagnetic compatibility regulations. Nevertheless, people with a pacemaker should not use this appliance. It is impossible to guarantee that all such devices found on the market comply with current safety regulations and electromagnetic compatibility regulations, and that dangerous interference will not occur. It is also possible that people with other types of device, such as a hearing aid, could experience some discomfort. [. . . ] You can not build the hob in above an oven with no fan, a dishwasher, fridge, freezer or washing machine. â· It is essential that the induction hob is well ventilated and that the air intake and exit are not blocked. NB: For safety, the gap between the hob and any cupboard above it should be at least 760mm. Always use good quality cookware with perfectly flat and thick bases : using this type of cookware will prevent hot spots that cause food to stick. Ensure that the base of the pot or pan is dry : when filling pans with liquid or using one that has been stored in the refrigerator, ensure that the base of the pan is completely dry before placing it on the hob. Use pans whose diameter is wide enough to completely cover the surface unit : the size of the pan should be no smaller than the heating area. If it is slightly wider the energy will be used at its maximum efficiency. The following information will help you select the pans best adapted to obtain good results. This coil creates a magnetic field, so that when the pan is placed on the hob, it is permeated by the induction currents. These currents make the pan into a real heat transmitter, while the glass ceramic hob remains cold. This system is designed for use with magnetic-bottomed pans. Timer can't be set when in the "BOOST" mode. In timer mode, if power knob is turned to "OFF" position, power setting returns to"0", time is cancelled. Turn the knob to the " " position for the relevant cooking zone, with the power level indicator flashing and showing "t" Before carrying out any maintenance work on the hob, allow it to cool down. â· Only products, (creams and scrapers) specifically designed for glass ceramic surfaces should be used. They are obtainable from hardware stores. â· Avoid spillages, as anything which falls on to the hob surface will quickly burn and will make cleaning more difficult. â· It is advisable to keep away from the hob all substances which are liable to melt, such as plastic items, sugar, or sugar-based products. mAINTENANCE: - Place a few drops of the specialised cleaning product on the hob surface. - Rub any stubborn stains with a soft cloth or with slightly damp kitchen paper. - Wipe with a soft cloth or dry kitchen paper until the surface is clean. If there are still some stubborn stains: - Place a few more drops of specialised cleaning fluid on the surface. [. . . ] Never leave a scraper with a razor blade within the reach of children. Before calling out a Service Engineer please check the following: -- that the plug is correctly inserted and fused; If the fault cannot be identified: switch off the appliance -- do not tamper with it -- call the Aftercare Service Centre. The appliance is supplied with a guarantee certificate that ensures that it will be repaired free of charge at the Service Centre. This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). [. . . ]