User manual ROSIERES RBLP230

[. . . ] GB INSTRUCTION MANUAL GB Dear customer, Before placing your new refrigerator/freezer into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. [. . . ] The side at which the door opens can be changed from the right side (as supplied) to the left side, if the installation site requires. Tilt the appliance slightly towards the rear and prop it securely. Unscrew the door hinge screws and remove the hinge pin bracket. Open the door a little way and take it out downwards. Unscrew the upper pin and screw it into place on the opposite side. Fit the door into the upper pin and close it. Screw the hinge pin bracket securely into place on the opposite side using the screws. Integrated Cooling Technical Diagrams 6 GB Positioning Position the appliance away from sources of heat such as stoves, radiators, direct sunlight etc. Maximum performance and safety are guaranteed by maintaining the correct indoor temperature for the class of unit concerned, as specified on the rating plate. Climate classification Ambient temperature SN 10~32 N 16~32 ST 16~38 T 16~43 This application works best from SN to ST Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the lower rear section of appliances, as poor air circulation can affect performance. Built-in appliances should be positioned away from heat sources such as heaters and direct sunlight. Description of the appliance View of the appliance 1. Vegetable drawers Starting up and temperature regulation Insert the plug of the connection lead into the plug socket with protective earth contact. When the refrigerator compartment door is opened, the internal lighting is switched on. The temperature selector knob is located on the RH side of the refrigerator compartment. Turning clockwise in direction Refrigerating unit on, the latter then operating automatically. At a low ambient temperature of around 16 , setting 1 should be selected. at ambient temperatures of around 25 , select setting 2. If you require a lower temperature, select setting 3 or 4. On hot summer days) and a cold setting on the temperature regulator (position 6 to 7) can cause the compressor to run continuously. Reason: when the ambient temperature is high, the compressor must run continuously to maintain the low temperature in the appliance. [. . . ] High ambient temperatures cause longer, more frequent operation of the compressor 2. In order to make the cooling system work efficiently, please make sure the side plates and back plate of the product are with some distance from the wall. It is strongly recommended that the distance should be more than 50mm. When the product works, please do not open the door too often or leave the door open any longer than necessary. [. . . ]