User manual ROSIERES RFAZ8573IN

[. . . ] LACELLE - Rosières - 18400 - Lunery - France Safety Indications • WARNING: the appliance and accessible parts become hot during use. €WARNING: the accessible parts can become hot when the grill is in use. Children should be kept at a safe distance. €WARNING: ensure that the appliance is switched off before replacing the bulb, to avoid the possibility of electric shocks. [. . . ] Expires (this function does not switch the oven off). You can select a time between 00:00 and 23:59. €Switched on for the first time, the display illuminates and shows SETTING "12:00". THE CLOCK •To modify the time, press EXTRA enough times to illuminate the icon and use the “<” and “>” keys to set the time, confirming it by pressing SELECT. €It allows you to set the time that appears on the display. •The alarm functions regardless of whether the oven is switched on. CHILD SAFETY LOCK •Press the EXTRA key enough times to illuminate the icon and then either the “<” or “>” key to activate this function: the display will show ON; to confirm press SELECT. €Press the EXTRA key enough times to illuminate the icon and then either the “<” or “>” key to deactivate this function: the display will show OFF; to confirm press SELECT. €If the function is active only the "Extra" button, to deactivate the function, and "On/Off" button can be used. €This function is useful when there are children in the house. EN 10 LANGUAGE SETTING: The language can be set when the oven is switched off by pressing the Extra and Select buttons simultaneously and for 3". The current language is shown on the display and can be changed by pressing the “<” or “>” keys, confirming it by pressing SELECT. If not confirmed within 15 seconds, the selection is cancelled. by changing menu , any unconfirmed selection is lost. €HOT” ICON: When a cooking programme finishes or when the oven switches off, if the oven is still hot, the display shows the current time alternating with the message “HOT” . MEAT PROBE (depends on the oven model) If the meat probe is identified, the display shows "PROBE". When a cooking programme is selected, the display shows the default temperature but is never higher than 200°C: the selectable temperature is also limited to 200°C. When the temperature is confirmed, by pressing "Select", the display shows “Ϙ 40°”: it is now possible to select the meat probe target temperature, between 30°C and 90°C at 1°C intervals. When the meat probe temperature is confirmed, press the "Select" key and the display shows “Ϙ” followed by the actual temperature taken by the meat probe (1 degree intervals). As soon as the meat probe reaches the set temperature, the cooking programme terminates. If a cooking programme is set with the meat probe, by pressing the "<" and ">" keys you can see and modify the temperature of the meat probe: at the first touch of one of the two keys, the display shows the meat probe target temperature, while at the next touch you can change the selected temperature of the probe. If the user changes the cooking programme, the meat probe temperature setting is reset. [. . . ] Tip : Carrying out Pyrolytic cleaning immediately after cooking allows you to take advantage of residual heat, thus saving energy. Before executing a pyrolytic cycle: •Remove all the accessories from the oven because they are not able to tolerate the high temperatures used during the pyrolytic cleaning cycle ; in particular removing grids, side racks and the telescopic guides (refer to the chapter REMOVING GRIDS AND SIDE RACKS) . In ovens with meat probe it is necessary, before making the cleaning cycle , close the hole with the nut provided. €Remove any large spillages or stains as it would take too long to destroy them. [. . . ]