User manual ROSIERES RHG 5211 IN

[. . . ] Check the data label inside the appliance; if the symbol ( ) is printed, read the following: this appliance has such technical particulars that it belongs to class II insulation, therefore it must not be earthed. Check the data label inside the appliance; if the symbol ( ) is NOT printed, read the following: ATTENTION: This appliance must be earthed. [. . . ] Cut a hole in the bottom of the pensile cupboard in order to settle the appliance (Fig. The pensile cupboard bottom hob must be between 15 and 18 mm thick. 6 to the wall unit are positioned at a height suited to the thickness of the bottom of the wall unit. If this distance is less than the thickness, increase it by unscrewing the 2 corresponding screws inside the hood. connect the disposal duct to the air evacuation pipe of the hood. Use a flexible pipe and lock it to the air evacuation pipe of the hood with a metal hose clamp (pipe and clamp are not provided). Take away the filters support moving the two lateral locks (C) (Fig. During the following operations always sustain the device. Tighten the two screws inside the device (Fig. 6); move the 2 tangs toward the devce inside using the right carvings (Fig. InstAllAtion in filterinG Version: Proceed with installation, making reference to the instructions for the extraction version (see points 2, 3, 4, 5), and then follow the instructions below. Connect the hose to the hood air outlet so the air is conveyed to the top of the wall unit; secure the hose with a metal clamp (hose and clamp are not provided). [. . . ] CAUTION: Do not handle glass bulb with bare hands. La distance minimum entre la surface de support des casseroles sur le plan de cuisson et la partie inférieure delahottedoitmesurer65cm, saufsilesinstructionspourl'installationsontdifférentes. [. . . ]