User manual ROSIERES RTT631SAVF

[. . . ] • Aluminium foil and plastic pans must not be placed on heating zones. €¢ After every use, some cleaning of the hob is necessary to prevent the build up of dirt and grease. If left, this is recooked when the hob is used and burns giving off smoke and unpleasant smells, not to mention the risks of fire propagation. €¢ Do not left metallic objects such as knives, forks, spoons or lids on the induction zone, because if they are too large or too heavy, they could become hot. [. . . ] The method of connection is shown in Figure(3): Seal L1 L2 N1 N2 Grey •You can not build the hob in above an oven with no fan, a dishwasher, fridge, freezer or washing machine. €¢ It is essential that the induction hob is well ventilated and that the air intake and exit are not blocked. Make sure the hob is correctly installed as shown in Figure(2) JIKI N HJ JIKI D JJ A`i \o`k JIKI B HJ The cable must not be bent or compressed. A`i `ekXb\ NB: For safety, the gap between the hob and any cupboard above it should be at least 760mm. 2 GB INDUCTION • Always use good quality cookware with perfectly flat and thick bases : using this type of cookware will prevent hot spots that cause food to stick. thick metal pots and pans will provide an even distribution of heat. €¢ Ensure that the base of the pot or pan is dry : when filling pans with liquid or using one that has been stored in the refrigerator, ensure that the base of the pan is completely dry before placing it on the hob. This will help to avoid staining the hob. €¢ Use pans whose diameter is as large as the graphic of the zone selected. Using a pot a slightly wider energy will be used at its maximum efficiency. If you use smaller pot efficiency could be less than expected. Select the power level by pressing the "+" or "-" key for the relevant hotplate. To begin with the indicator shows" " by pressing the "+" or "-" key. Adjust up or down by pressing the "+" or "-" key. If the timer is set on more than 1 zone: Timer can be set on all 3 cooking zones. When you set the time for several cooking zones simultaneously, decimal dots of the relevant cooking zones are on. If you press the "+" and "-" keys simultaneously, the power setting returns to" "and the cooking zone switches off. On the timer display will be shown the timer than will expire first. The dot of the corresponding zone will be on but flashing. Once the countdown timer expires the corresponding zone will be switch off. Then it will be shown the new first expiring timer and the corresponding zone will have the dot flashing. NB : When the " " key is pressed, the induction hob returns to standby mode if no other operation is carried out within 1 minute. [. . . ] They are obtainable from hardware stores. €¢ Avoid spillages, as anything which falls on to the hob surface will quickly burn and will make cleaning more difficult. €¢ It is advisable to keep away from the hob all substances which are liable to melt, such as plastic items, sugar, or sugar-based products. MAINTENANCE: - Place a few drops of the specialised cleaning product on the hob surface. [. . . ]