User manual ROTEL RA-02

[. . . ] WARNING: There are no user serviceable parts inside. refer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not allow foreign objects to get into the enclosure. [. . . ] If you are going to be away from home for an extended period of time such as a month-long vacation, it is a sensible precaution to unplug your amplifier (as well as other audio and video components) while you are away. WARNING: To avoid potential damage to your system, turn off ALL the components in the system when connecting or disconnecting the loudspeakers or any associated components. Do not turn the system components back on until you are sure all the connections are correct and secure. pay particular attention to the speaker wires. There must be no loose strands that could contact the other speaker wires, or the chassis of the amplifier. It provides information on how to incorporate the RA-02 into your system as well as information that will help you get optimum sound performance. Please contact your authorized Rotel dealer for answers to any questions you might have. in addition , all of us at Rotel welcome your questions and comments. Save the RA-02 shipping carton and all enclosed packing material for future use. Shipping or moving the RA-02 in anything other than the original packing material may result in severe damage to your amplifier. Fill out and send in the owner's registration card packed with the RA-02. Also be sure to keep the original sales receipt. It is your best record of the date of purchase, which you will need in the event warranty service is ever required. Be sure to keep the power cords, digital signal cables and regular audio signal cables in your installation away from each other. This will minimize the chance of the regular audio signal cables picking up noise or interference from the power cords or digital cables. Using only high quality, shielded cables will also help to prevent noise or interference from degrading the sound quality of your system. If you have any questions see your authorized Rotel dealer for advice about the best cable to use with your system. Press the front panel Power Switch button, to turn the RA-02 on. The Power Indicator light is illuminated when the RA-02 is on. Press Power Switch button again to turn the RA-02 off. Once the RA-02 has been turned on with the front panel power switch, it can be switched between normal operating mode and standby mode with the Power button a on the RR-AT94 remote control. See the "12V Trigger Outlet" section for more information on ways you may be able to turn on and off other components in your system along with the RA-02. [. . . ] When the Monitor Control is in the Monitor position, the signal from the Tape Input also goes to the Preamp Outputs. The signal that goes to the Tape Output is always selected by the Function Control. When you are recording with a unit that has monitoring capabilities, you can listen to the sound just recorded by setting the Monitor Control to the Monitor position. The IR OUT jack sends IR signals received at the EXTERNAL REM IN jack to an infrared emitter, or to Rotel CD players, cassette decks, or tuners with a compatible rear panel IR connector. [. . . ]