User manual ROTEL RC-870BX

[. . . ] If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take the unit to a qualified service person for inspection and necessary repairs. Read all the instructions before connecting or operating the unit. Keep this manual so you can refer to these safety instructions. [. . . ] Please contact your authorized Rotel dealer for answers to any questions you might have. in addition , all of us at Rotel welcome your questions and comments. Save the RC-870BX shipping carton and all enclosed packing material for future use. Shipping or moving the RC-870BX in anything other than the original packing material may result in severe damage to your amplifier. Fill out and send in the owner's registration card packed with the RC-870BX. Also be sure to keep the original sales receipt. It is your best record of the date of purchase, which you will need in the event warranty service is ever required. Be sure to keep the power cords, digital signal cables and regular audio signal cables in your installation away from each other. This will minimize the chance of the regular audio signal cables picking up noise or interference from the power cords or digital cables. Using only high quality, shielded cables will also help to prevent noise or interference from degrading the sound quality of your system. If you have any questions see your authorized Rotel dealer for advice about the best cable to use with your system This compact unit allows you to operate many of the controls of the RC-870BX from your listening location. Certain types of lighting, such as halogen lights, that emit a fair amount of infrared light, can also interfere with proper operation. In addition remote control functions may not work reliably if the batteries in the RR-C91 are weak. ] The RC-870BX has conventional RCA type input connectors, the type found on nearly all audio equipment. ] The Tape inputs and outputs can be connected to any record/playback device that accepts standard line level analog input and output signals. typically that will be a conventional tape recorder. When connecting a recorder to the RC-870BX remember that the outputs of the recorder must be connected to the tape inputs of the RC-870BX. similarly the tape outputs of the RC-870BX must be connected to the inputs of the recorder. As with other sources be sure to connect the Left and Right channels of each device to the proper channels on the associated components. Use high quality connecting cables to prevent loss of sound quality. Your RC-870BX is configured at the factory for the proper AC line voltage in the country where you purchased it (either 115 volts AC or 230 volts AC with a line frequency of either 50 Hz or 60 Hz). The AC line configuration is noted on a decal on the back panel. [. . . ] The RC-870BX has two switched outlets on the back panel. Power is available from these outlets when the RC-870BX is turned on. These outlets can provide up to a total of 400 watts. They are appropriate for supplying power to signal sources, such as CD players, tuners, or tape decks. [. . . ]