User manual ROTEL RCC-935

[. . . ] If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take the unit to a qualified service person for inspection and necessary repairs. Read all the instructions before connecting or operating the unit. Keep this manual so you can refer to these safety instructions. [. . . ] Pressing the Disc Skip button when a disc is not playing selects the next disc. If the Disc Skip button is pressed when a disc is playing, the RCC-935 stops playing the current disc, selects the next disc, and begins playing track 1 of that disc. When the Disc Tray is open discs can be loaded into the three disc positions at the front of the tray. To load discs into the remaining positions press the Disc Skip button 11 to rotate the carousel. Press the Open/Close button again to close the Disc Tray when you are done loading discs. The disc will begin playing with Track 1, unless another track has been selected before the Play button is pressed. unless one of the Repeat Play functions has been selected: · After the last track on discs 1 through 4 is played, the next disc is selected and play continues with track 1 of the disc. Press the Pause Button again, or the Play Button, to resume playing the disc at the same track and time. The disc will remain selected but the track selection will go back to track 1. When a disc is not playing: · press the button to select the next track on the disc. Press and hold the button to advance more than one track on the disc. if the selected disc has more than 16 tracks the Additional Track Indicator is lit. When a disc is selected, the Track Calendar Display shows the total number of tracks on the disc. The number of the track that is playing flashes. After a track is played the number for that track is turned off. If there are more than 16 tracks on the disc after track 16 is played the indicator flashes. The Track Indicator shows number of the track being played, or the number of tracks remaining, depending on the Time Display mode selected. When programmed tracks are played, only the number(s) of the programmed track(s) are illuminated. The number of the track that is playing flashes, and is turned off after the track is played. If the Repeat 1 Disc option is selected when a disc is not playing, the disc that is selected when the play button is pressed begins playing track 1. After the last track on the disc, play continues, starting with track 1 of the disc. If the Repeat 1 Disc option is selected while a track is playing, that track continues to play. [. . . ] The Repeat All Disc function works when programmed tracks are playing. The other Repeat functions cannot be selected. When the Repeat function is turned on the first programmed track begins playing after the last programmed track has been played. Similarly, the first programmed track begins playing if you press the when the last programmed track is playing or if you press the until you reach the end of the last programmed track. [. . . ]