User manual ROTEL RCC-940AX

[. . . ] Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take the unit to a qualified service person for inspection and necessary repairs. Read all the instructions before connecting or operating the unit. [. . . ] If one of the Disc 1-5 button is pressed when a disc is playing, the RCC-940AX stops playing the current disc, selects the corresponding disc, and begins playing track 1 of the disc. Press the Open/Close button on either the front panel or the remote control to open the Disc Tray. Place discs in the numbered recesses in the Disc Carousel with the label sides up. Be sure the discs are centered in the recesses in the Disc Carousel. Both standard 12cm disc and 8 cm disc may be loaded. There is a separate recessed area in the carousel for 8cm discs. When the Disc Tray is open discs can be loaded into the three disc positions at the front of the tray. To load discs into the remaining positions press the Disc Skip button 11 to rotate the carousel. Press the Open/Close button again to close the Disc Tray when you are done loading discs. and 19 Press the Play Button to play the disc indicated in the Disc Display. The disc will begin playing with Track 1, unless another track has been selected before the Play button is pressed. Unless one of the Repeat Play functions has been selected: · After the last track on discs 1 through 4 is played, the next disc is selected and play continues with track 1 of the disc. · At the end of disc 5 disc play stops. If the Remaining Disc Playing Time display option has been selected the Disc Selection Indicator changes to a "­". shows either the track that is selected, The Track Indicator the total number of tracks on the disc, or the number of tracks that remain on the disc. One of the Repeat Play Mode Indicators will light if one of the repeat play options has been selected. See the Repeat Play Button section for more information. is lit when one of the random play The Random Play Indicator options is being used. lights whenever the track proThe Program Play Indicator gramming function is activated. is lit when the Intro Scan feature is The Intro Scan Indicator activated. lights when one of the alternaThe Remaining Time Indicator tive time display functions is activated. shows either the total playing time of the The Time Display disc that is selected, the amount of time the current track has been playing, the remaining playing time of the current track, or the remaining time of the disc that is playing. shows the total number of tracks on Track Calendar Display the disc that is playing and the track that is currently playing. If the selected disc has more than 16 tracks the Additional Track Inis lit. [. . . ] The other Repeat functions cannot be selected. When the Repeat function is turned on the first programmed track begins playing after the last programmed track has been played. Similarly, the first programmed track begins playing if you press the when the last programmed track is playing or if you press the until you reach the end of the last programmed track. x Adding Tracks to a Program You can add track selections to the programmed list at any time, even after you've begun playing programed selections. If the track you want to add is on the disc that is playing, just select the new track with the Track Selection buttons. [. . . ]