User manual ROTEL RD-960BX

[. . . ] If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take the unit to a qualified service person for inspection and necessary repairs. Read all the instructions before connecting or operating the component. Keep this manual so you can refer to these safety instructions. [. . . ] The STANDBY button is located on the front panel of the RD-960BX and is not duplicated on the remote control. The STANDBY LED will be lit when the AC input line is connected. Available on the front panel and remote control, this button selects four display brightness settings. press the button to cycle through the four settings. NOTE: When the tuner is turned off then back on, the display reverts to its normal setting. The dimmer setting is also available in the SETUP menu for memory setup until the AC line is disconnected. The RD-960BX features a digital synthesized AM/FM tuner with RDS or RBDS capability, 30 station presets and a DAB tuner with a maximum of 99 station presets. Manual frequency tuning lets you tune up or down to the next station frequency. Press the FREQUENCY DIRECT button on the remote or front panel and enter the digits using the NUMERIC buttons. Automatic frequency search tuning lets you search up or down to find the next available broadcast signal. Use the TUNING controls to search up or down. A PRESET indicator in the front panel DISPLAY will light when the PRESET mode is active. The FM MONO button changes the FM mode from stereo reception to mono reception. In stereo mode, a stereo signal will be heard if the station is broadcasting a stereo signal and there is sufficient signal strength. A stereo indicator will light in the front panel display. in mono mode , a mono signal will be heard even if the station is broadcasting a stereo signal. NOTE: Switching to mono mode can be a useful way to improve the reception of weak or distant FM signals. Less signal strength is required for clean mono reception than for stereo reception. If no frequency is entered within 5 seconds, the tuner will cancel FREQUENCY DIRECT tuning mode and revert to the last previously tuned station. These broadcast systems provide additional functionality to FM radio reception by transmitting encoded information along with the radio signal. This signal is decoded by an RDS or RBDS receiver and can provide a range of informational features including: 1. In addition, RDS provides several advanced search features including 1. [. . . ] Choose <No> by keying the UP/DOWN buttons of front panel, press ENTER if you do not wish to retune. Choose <Yes> by keying the UP/DOWN buttons of the front panel, press ENTER to search new ensembles and replace current stations automatically. Power Consumption Standby Power Consumption Power Requirements (AC) Weight Dimensions (W x H x D) Panel Height All specifications are accurate at the time of printing. Rotel reserves the right to make improvements without notice. [. . . ]