User manual ROTEL RDP-980

[. . . ] WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not expose the unit to dripping or splashing. Do not place objects filled with liquids, such as vases, on the unit. Do not allow foreign objects to get into the enclosure. [. . . ] · On a 6. 1/7. 1 system with a DTS-ES disc. Press the SUR+ button on the remote, then use the +/­ buttons to step through three optional modes: DTS 2. 0 channel downmix, DTS 5. 1, or DTS-ES 6. 1ch/7. 1ch playback. On the front panel, press the DTS Neo:6 button while playing a DTS source to step through the same options. · On a 6. 1/7. 1 system with a DTS 96/24 disc. Press the SUR+ button on the remote, then use the +/­ buttons to step through the optional modes: DTS 2. 0 channel downmix, DTS 96, or DTS 96 with Rotel XS center back processing. You can also repeatedly press the front panel DTS Neo:6 button until the desired option is selected. Note: When playing any Dolby Digital source, you can select one of three dynamic range control settings. See the Dynamic Range topic in the Other Settings section of this manual. Dolby Digital 2. 0 discs qTVW Dolby Digital decoding is auto-detected and cannot be overridden. You may, however, select 2-channel playback, 5. 1 channel playback with Pro Logic II matrix surround, 6. 1/7. 1 channel playback with Pro Logic IIx matrix surround, or Dolby 3-Stereo playback. Press the SUR+ button on the remote, then use the +/­ buttons to step through four options: DD 2. 0 channel, DD with Pro Logic II Cinema matrix surround, DD with Pro Logic II Music matrix surround, or Dolby Digital 3 channel stereo. You can also repeatedly press the 2CH button on the front panel or the remote to select the same options. Press the SUR+ button on the remote, then use the +/­ buttons to step through four options: DD 2. 0 channel, DD with Pro Logic IIx Cinema matrix surround, DD with Pro Logic IIx Music matrix surround, or Dolby Digital 3 channel stereo. · On a 6. 1/7. 1 system with a DTS 5. 1 disc. Press the SUR+ button on the remote, then use the +/­ buttons to step through the optional modes: DTS 2. 0 channel downmix, DTS 5. 1 channel, DTS with Rotel XS center back processing, DTS with Pro Logic IIx Music center back processing, or DTS with Pro Logic IIx Cinema center back processing RDP-980 English v2. indd 34 29/9/08 15:16:05 English 35 · To select DSP multichannel modes for 2-channel digital recordings. You can also step through the DSP options (MUSIC 1-4, 5CH, 7CH) by repeatedly pressing the DSP button on the front panel. Directly select 5CH mode by pressing the 5CH button on the remote. Directly select 7CH mode by pressing the 7CH button on the remote. To change the Cinema or Music option in Neo:6 mode, press the SUR+ button on the remote twice while in Neo:6 mode. Then, press the +/­ buttons to select the option. · To select DSP multichannel modes for 2-channel analog recordings. You can also step through the DSP options (DSP 1-4, 5CH, 7CH) by repeatedly pressing the DSP button on the front panel. Directly select 5CH mode by pressing the 5CH button on the remote. Directly select 7CH mode by pressing the 7CH button on the remote. Analog Stereo qTVW This type of recording includes any conventional stereo signal from the receiver's analog inputs, including analog audio from CD players, FM tuners, VCRs, tape decks, etc. Analog stereo inputs require a choice about how the signal is routed through the receiver. [. . . ] Which is the best way to rescale the picture?When using legacy components that require picture rescaling, it is better to use the monitor scaler to handle any picture resizing. You should try to use only one scaler in the system, so keep your DVD player set to 480p or 1080p. A 480p signal will be rescaled by the monitor and a 1080p signal will be seen by a monitor with 1080p resolution as a native signal. [. . . ]