User manual ROTEL RDV-1093

[. . . ] Owner's Manual DVD Audio/Video Player RDV-1093 Register your product at www. Rotel. com/register RDV-1093 DVD Audio/Video Player 2 Important Safety Instructions WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not expose the unit to dripping or splashing. [. . . ] If the RDV-1093 is in standby mode with a disc loaded, pressing the PLAY / button will "wakeup" the unit and begin playing the disc. By default, DVDs either begin playing automatically or display a start-up menu as soon as the disc is inserted. See DVD Playback in the Setup section of this manual for information. The PLAY / button usually starts play from the beginning of the disc, except after the PAUSE , button has been pressed. In this case, the disc will resume playing from the current location. The RDV-1093 also has a resume feature that restarts play at the current location after pressing the STOP . button once during playback. Playing a Disc The TRACK { } buttons skip forward/back to the beginning of the next selection. While a disc is playing, pressing the right TRACK { } button once advances to the beginning of the next Chapter or Track. Pressing the left button returns to the beginning of the current scene or song. Pressing twice in quick succession returns to the beginning of the previous Chapter or Track. Press the button as many times as necessary to find the desired scene or selection. For a DVD-Video disc: During playback, this feature usually skips to the next Chapter, although it may skip to the next Title on some discs, depending on the disc configuration. For an Audio CD or DVD-Audio disc: While the disc is playing or stopped, this feature skips to the next Track. NOTE: There are other methods of locating specific selections on a disc, including direct access with the NUMERIC buttons and using the On-Screen Menu features. See Playing Specific Selections for details. Skip forward/back NOTE: The sound is muted during slow-motion play. Slow-motion is not available on Audio CDs. Slow motion reverse play is only available on DVD-Video discs. Time Display The disc time indicators in the front panel display and the On-Screen status bar can show several different types of information for DVD-Audio, and Audio CD discs. Options include elapsed time or remaining time for a single selection (chapter or track) or entire disc (or Title for DVD-Video). · Press the DISPLAY button to display the elapsed time of the current disc or Title in the Status Bar and front panel display. On DVD-Video discs, the current Title and Chapter are also displayed for several seconds. · Repeatedly press the DISPLAY button to step through additional time display options: remaining time of the current Disc/Title, elapsed time of the current Chapter/Track, and remaining time of the current Chapter/Track. · The Status bar disappears automatically after the amount of time specified in the Status bar delay setting of the System Setup menu. High Speed Play Stopping Disc Playback Press the STOP is playing. The SEARCH [ ] buttons allow you to activate high speed play, either forward or reverse. [. . . ] Turn off the power and unplug the power cord. · Moisture condensation caused by a sudden change of temperature or humidity. Turn off the power, then turn it on a few hours later. · If only one specific disc will not play, the disc may be defective. [. . . ]