User manual ROTEL RP-955

[. . . ] If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take the unit to a qualified service person for inspection and necessary repairs. Read all the instructions before connecting or operating the component. Keep this manual so you can refer to these safety instructions. [. . . ] But only newer, high performance TVs can accept progressive signals. Not all resolutions are available from every output. component V ideo: NTSC 480p , PAL 576p S-Video , Composite Video: NTSC 480i , PAL 576i HDMI Output: All resolutions available. If you are unsure about which setting to use, contact your authorized Rotel dealer. output Signal Notes · The picture may be distorted for a period of time after you press ENTER button. This is not a malfunction of the system. ⷠSome progressive signal and high-definition TVs are not fully compatible with this unit. This will result in an unnatural picture when playing a DVD VIDEO with progressive scanning. Even if the power cord of the DVD player is disconnected from the AC outlet or the power is interrupted, the video signal type setting is stored. One of the following messages may appear in the display when the RP-955 is turned on: NOW READING ­ Appears when the DVD player is reading the disc information. Do not try to operate the unit until this message goes away. The Numeric Buttons 9 can also be used to select a Track or Title. When a disc with JPEG images is loaded, pressing / (PLAY) will start a "slide show" of the images. Each image is shown for about 3 seconds. Press the button again to go back to the original display mode. At times you may see the following icons on the screen: Play Pause Fast reverse/fast forward search Slow motion playback (reverse/forward directions) Containing multi-view angles (See "Selecting Viewing Angles") Containing multi-audio languages (See "Selecting the Audio Language") Containing multi-subtitle languages (See "Selecting the Subtitle Language") The disc cannot accept the operation you have attempted. When a DVD Audio disc is playing press the Display button 2 to show the Group Number and Track Number. Press the button again to go back to the original display mode. ⷠWhen a VCD or SVCD with PBC function is played, "PBC" appears instead of the elapsed playing time. This method of Track/Chapter selection will not work with some discs. Press the button again to go back to the original display mode. When an ASF disc is playing Press the button again to go back to the original display mode. [. . . ] The disc cannot be played back on this DVD player. MP3, WMA, JPEG, ASF, MPEG1 or MPEG2 files cannot be played back. ⷠThe loaded disc may include files of different types (MP3, WMA, JPEG, ASF, MPEG1 or MPEG2). You can play back only the files of the types selected with "FILE TYPE". [. . . ]