User manual ROTEL RSX-1065

[. . . ] Owner's Manual RSX-1065 Surround Sound Receiver SURROUND SOUND RECEIVER RSX-1065 DIGITAL PRO LOGIC dts DSP PRESET RDS ZONE OPT COAX 1 2 3 4 5 A 5. 1 7. 1 FL C FR SL SR SW Sbl Sbr Sb ST TUNED VOLUME CD TUNER TAPE VIDEO1 VIDEO2 VIDEO3 VIDEO4 VIDEO5 2CH 3 STEREO PRO LOGIC II DSP MULTI INPUT DYNAMIC RANGE ZONE REC 1 2 3 4 5 TUNING BAND BASS 6 7 8 9 0 DIRECT MONO MEMORY TREBLE POWER RSX-1065 Surround Sound Receiver 2 Important Safety Instructions WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not allow foreign objects to get into the enclosure. [. . . ] Search for a station with the desired program content (PTY) 2. Search for stations broadcasting special traffic announcements (TA). RDS broadcasting has been widely available in many European markets for years. There are a large number of RDS stations and most users will be familiar with the features and operation. In the USA, implementation of the RBDS system is more recent. Fewer stations are broadcasting RBDS signals and the features may be less familiar to many users. Consult your authorized Rotel dealer for more information on RDS or RBDS broadcasting in your area. NOTE: The RDS and RBDS features are entirely dependent on the broadcaster sending encoded signals. Thus, they will only be available in markets where RDS or RBDS is implemented and where stations are broadcasting these data signals. If there are no RDS or RBDS stations, the RSX-1065 will function as a standard radio receiver. NOTE: RDS and RBDS services are only available on FM broadcasts. The features and buttons described below are only operational in FM mode. PTY Button The PTY search function permits you to scan available broadcasts for RDS stations broadcasting a particular type of program content. The current RDS program type will appear in the display. If desired, change to a different PROGRAM TYPE using the TUNING UP/DOWN buttons to scroll through the list. Press the PTY button a second time within 5 seconds. The tuner will attempt to find an RDS station broadcasting the selected type of program. If the button is not pressed within 5 seconds after selecting a program type, the PTY function will be cancelled. If no station is located for the desired content type, the tuner will return to the last previously tuned station. Cancel the PTY function by pressing any other button. NOTE: If the currently tuned station is broadcasting PTY data, a PTY indicator lights in the front-panel display. DISPLAY Button There are five display options when the currently tuned station is broadcasting RDS information and the RDS indicator in the front-panel display is lit. Press the DISPLAY button on the remote to step through the five display options: 1. This is typically the station's call letters, such as BBC1. If the current station is not broadcasting an RDS signal, the display will show "NO NAME DATA". This is a description of the station's content from a standardized list of program types in each market. [. . . ] You will lose ALL system configuration settings. Be certain that you wish to do so before resetting the factory defaults. NOTE: To activate memorized USER DEFAULT settings: After you have stored a USER DEFAULT configuration file, you can activate those settings at any time by placing the highlight on the USER DEFAULT line using the UP/ DOWN buttons. Use the +/­ buttons to change the setting to YES. The screen will change to a confirmation screen. [. . . ]