User manual ROTEL RTC-970

[. . . ] WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not expose the unit to dripping or splashing. Do not place objects filled with liquids, such as vases, on the unit. Do not allow foreign objects to get into the enclosure. [. . . ] If the disc drawer is open, it will close automatically. By default, DVDs either begin playing automatically or display a start-up menu as soon as the disc is inserted. See DVD Playback in the Setup section of this manual for information. The PLAY button usually starts play from the beginning of the disc, except after the PAUSE button has been pressed. In this case, the disc will resume playing from the current location. The RTC-970 also has a resume feature that restarts play at the current location after pressing the STOP button once during playback. There are other methods of locating specific selections on a disc, including direct access with the NUMERIC buttons and using the On-Screen Menu features. See Playing Specific Selections for details. Stopping Disc Playback Press the STOP is playing. button to stop a disc that High Speed Play The SEARCH buttons allow you to activate high speed play, either forward or reverse. During playback, press and release the SEARCH buttons to begin video and audio playback at 2x normal speed, backwards or forwards. Each time you press the button again, the playback speed increases from to 2x, 4x, 8x, 16x, 30x, or 60x normal speed, and back to normal speed. You to resume normal can also press PLAY playback. The first press of the STOP button memorizes the point at which the disc stopped playing. Press the CURSOR buttons to highlight the Title selection and press the ENT button. Press the GOTO button to toggle from the Time mode to the Title mode. Enter the new Title number using the NUMERIC buttons, For example, to select the 5th Title, press 0, then 5. To select the 15th Title, press 1, then 5. Press the ENT button to begin play. To move the zoomed-in video image, press the CURSOR buttons in the desired direction. The zoomed image moves up, down, left, or right to show the desired portion of the full image. NOTE: "Operation not possible" appears in the Status Bar when the zoom feature is disabled on the current disc. Selecting Audio Tracks Some DVD-Video and DVD-Audio discs have audio tracks recorded in alternate languages, alternate audio formats (such as Dolby Digital 2. 0, Dolby Digital 5. 1, or DTS) or with alternate content (such as director's commentary). Typically, you select these audio tracks with the disc's setup menus which appear when you insert the disc or which can be accessed during playback by pressing the MENU button. In addition, you can change to an alternate audio track during playback by pressing the AUDIO button on the remote. The Status Bar display shows the current audio track description and its number. Press the AUDIO button repeatedly until the desired audio track is selected. Select Chapters from DVD Menu DVD-Video discs usually have scene selection menus that display the selections on the disc on the TV screen. Press the MENU button on the remote if the disc's menu is not already displayed. [. . . ] · Make sure that the PAL/NTSC setting matches your TV. HDMI LED flashing continuously and no picture. · HDMI cables must be 5 meters or less in length. · Most DVD Video discs are Macrovision, HDCP compliant. [. . . ]