User manual ROWENTA P2 PROFESSIONAL

[. . . ] Incorrect reassembly can cause a risk of electric shock when the iron is used. Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while plugged in or on an ironing board. Burns can occur from touching hot metal parts, hot water or steam. [. . . ] Press the spray button down slowly for a jet or quickly and strongly for a mist. Do not spray silk, etc. P2 BURST OF STEAM To remove stubborn wrinkles or press in a sharp crease, use the burst of steam button. Press the button firmly, a strong burst of steam penetrates deep into the fabric. Leave an interval of at least four seconds between pressing the burst of steam button. With water in the tank, the burst of steam button can be used as soon as the steam ironing temperature has been reached (qqq). 32 0 m ml ax 32 0 m ml ax L SIONA PROFES anti drip P2 SIONA PROFES anti drip L VERTICAL STEAM The iron can also be used vertically. This is especially useful for getting creases out of hanging clothes, curtains, tapestries, etc. P2 32 m 0m ax l Warning: Never iron clothes while they are being worn. POINT TO NOTE If the iron has not been used for a long time (e. g. several weeks) the steam channels should be cleaned and any deposits removed from the iron. To do this, hold the iron horizontally before you start to use it and allow it to produce steam for about 1 minute. Also activate the burst of steam button several times. DRY IRONING Slide the variable steam control fully to the left. We recommend dry ironing with an empty tank to be sure there are no drips, but it can also be performed with water in the tank. PROFESSIONAL anti drip min max Self Clean 7 AFTER IRONING Unplug the iron. Slide the variable steam control completely to the left (the minimum position) and empty any water left in the tank. Integrated cord wrap For easy storage, the cord can be wound loosely around the heel once the iron has cooled down completely. To protect the soleplate always store the iron on its heel. Important: Always empty the water tank when you have finished ironing! P2 PRO FESSIO anti NAL drip WATER TO USE IN ROWENTA IRONS Tap water Rowenta irons are designed to be used with REGULAR TAP WATER (up to 12 grains of hardness). If your water is harder than this, Rowenta recommends mixing half tap water with half distilled water which reduces the hardness; or using inexpensive bottled spring water. Never use 100% distilled water since this can cause the iron to spit and leak. Softened water There are many types of household water softeners and the water from many of them is perfectly acceptable for use in an iron. However, some types of softeners, particularly those that use chemicals such as salt, can cause the iron to leak or spit during use. If you experience this type of problem, we recommend that you try using inexpensive bottled spring water or untreated tap water. Once you have changed water it will take several uses to correct the problem. Rowenta recommends trying the steam function for the first time on an old towel or cloth to avoid damaging your clothes. [. . . ] Most softened water is alright, but if you experience leaks or spitting, change to untreated tap water or inexpensive bottled spring water. Move iron or gently shake. SOFTENED WATER Auto-off activated?(depending on model) Overuse of burst of steam. (depending on model) Ready light goes This is normal. [. . . ]